I had this same problem, and it turned out that in the TOSBoot
implementation for the mica2dot plaform, the GPIO pins were not being
initialized. My memory is a little fuzzy about exactly what needs to be
modified---it was months ago and I have not looked at Deluge since---but I
believe it was "tos/lib/Deluge/TOSBoot/at45db/ExtFlashC.nc". I added the
following lines to the StdControl.init(), and I think that was all I
changed. It is possible that I forgot something, so you should verify that
this works. Also, don't forget that you need to recompile TOSBoot.
Rebuilding your application is not sufficient. Also, I was under the
impression that Jonathan Hui had submitted this fix to the CVS tree. So, it
might be fixed in a later version.
Hope that helps,
Jacob Sorber
//Add this to ExtFlashC.nc
command result_t StdControl.init()
{
TOSH_MAKE_FLASH_CS_OUTPUT();
TOSH_SET_FLASH_CS_PIN();
TOSH_MAKE_FLASH_CLK_OUTPUT();
TOSH_CLR_FLASH_CLK_PIN();
TOSH_MAKE_FLASH_OUT_OUTPUT();
TOSH_SET_FLASH_OUT_PIN();
TOSH_MAKE_FLASH_IN_INPUT();
TOSH_CLR_FLASH_IN_PIN();
return SUCCESS;
}
On 1/16/07, Pablo Gil Montaño <[EMAIL PROTECTED]> wrote:
Hi,
Have you tried Deluge included in revision 1.1.14? The thing you explain
about not changing the program in execution after rebooting is exactly what
happened to me when I was using Deluge included in tinyos revision 1.1.15.
You just have to substitute tos/lib/Deluge and all its subfolders with the
ones iin revision 1-1-14 in tinyos CVS repository available at
sourceforge.net.
With respect to the SerialForwarder problems. Does it happen only with
Deluge java api? You could try using another application that also sends
messages to the nodes. You can try with Drip, which injects packets
epidemically on the network (tos/lib/Drip/README for more info).
Regards,
Pablo Gil
----- Mensaje original ----
De: colombo <[EMAIL PROTECTED]>
Para: Pablo Gil Montaño <[EMAIL PROTECTED]>
Enviado: lunes, 15 de enero, 2007 22:05:26
Asunto: Re: [Tinyos-help] Deluge 2 and mica2DOT
Hi ,
Thanks for your explanation. I can´t put tinyos1.1.15 work with only the
mica2. With the mica2dot i cannot change the image. i can inject in both
cases (mica2 and mica2dot) but when I try to reboot to another image, in
mica2dot don´t change. It remains on the same.
Another problem is: I have one mica2 that is a a gateway runing TOSbase
and another mica2 in the network. When I use the Deluge java api to inject a
image into the mica2 on the network, i get to many errors in the serial
forwarder and thakes to long to Load the image into it.
Thanks
Arnaldo Monteiro
On 15/01/07, Pablo Gil Montaño <[EMAIL PROTECTED]> wrote:
>
> Hi all,
>
> I've been trying to make Deluge 2.0 work on mica2 (under tinyos-1.x).
> Finally I got it working, I'll post here how I did it just in case it is of
> any use to someone.
>
> The first reason why it didn't work was that I was using a version of
> some tools (avr-gcc, avr-libc, etc.) different from the ones provided in
> tinyos webpage [1]. These versions are the ones in the Ubuntu repositories,
> and are higher versions. The problem was that image files generated by
> avr-gcc version in ubuntu repositories turned out to be considerably bigger
> than the one generate by the older version. Deluge java toolchain considered
> it too big (too many pages) and wouldn't transfer it to the mote.
>
> Secondly, Deluge in CVS revision 1.1.15 doesn't seem to work well with
> mica2 motes. This problem has already been described in previous mails in
> this list (e.g.: message from Simon Willis on Wed, 27 Dec 2006, titled
> 'Bugs found in Deluge/TOSBoot'). I just subsituted the entire
tinyos-1.x/tos/lib/Deluge
> folder with revision 1.1.14 in the repositories and now it works.
>
> Regards,
>
> Pablo Gil
>
>
>
> ----- Mensaje original ----
> De: Pablo Gil Montaño <[EMAIL PROTECTED]>
> Para: colombo < [EMAIL PROTECTED]>;
> [email protected]
> Enviado: lunes, 15 de enero, 2007 17:34:03
> Asunto: Re: [Tinyos-help] Deluge 2 and mica2DOT
>
> Hi all,
>
> I'm trying just to make deluge 2.0 work on mica2 motes under tinyos-1.x.
>
> I have formatted the flash and uploaded DelugeBasic application. The
> node responds to ping messages sent through Deluge java toolchain, but when
> I try to inject an image, I always get the following error:
>
> Error: tos image is too large
>
> This happens with any image (I mean, if I just program them directly
> without Deluge, they work), and regardless which image number I try to use
> (I get image number 0,1 and 2 when pinging the node).
>
>
> Regards,
>
> Pablo Gil
>
>
>
> ----- Mensaje original ----
> De: colombo <[EMAIL PROTECTED]>
> Para: [email protected]
> Enviado: viernes, 12 de enero, 2007 22:02:10
> Asunto: [Tinyos-help] Deluge 2 and mica2DOT
>
> Hi,
>
> I have the same problem. Does you resolved yet ?
>
> Thanks
>
> Arnaldo Monteiro
>
> Hi
>
> I have a strange problem.
>
> Deluge 2 works perfectly with my mica2 motes.
> But with the mica2DOT motes I'm encountering some problem.
>
> I can install the tos_image.xml files (of course compiled for mica2DOT)
>
> into the motes with the deluge inject command.
> Also the deluge ping command works and shows correct results, but
> somehow the deluge reboot command has no effects, the corresponding
>
> image is not executed.
>
> If i put the program directly with the make install command on the motes
> it works.
>
> Has anybody had the same problem or any idea what could be wrong ?
>
> Thanks a lot
>
> Hannes
>
> _______________________________________________
> Tinyos-help mailing list
> [email protected]
> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
>
>
> ------------------------------
>
> LLama Gratis a cualquier PC del Mundo.
> Llamadas a fijos y móviles desde 1 céntimo por minuto.
>
http://es.voice.yahoo.com<http://us.rd.yahoo.com/mail/es/tagline/messenger/*http://es.voice.yahoo.com/>
>
>
> ------------------------------
>
> LLama Gratis a cualquier PC del Mundo.
> Llamadas a fijos y móviles desde 1 céntimo por minuto.
>
http://es.voice.yahoo.com<http://us.rd.yahoo.com/mail/es/tagline/messenger/*http://es.voice.yahoo.com/>
>
------------------------------
LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com<http://us.rd.yahoo.com/mail/es/tagline/messenger/*http://es.voice.yahoo.com/>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
