I'm afraid I have no hope of an idea of what's wrong
without getting a gander at the actual code. Also I don't
know what you are sampling that is "movng up like being
saturated" and then shouldn't "keep going down"...
More info?
MS
Ho Kwon wrote:
Hi All
I am struggling with sensing and transmitting on the MICAz.
Once MIC senses 512 samples as one frame at around 8kHz, it stops
sensing and transmits 16 packets whose payload contains of 32 samples.
When frames are plotted in the base station, the first frame looks good,
moving up like being saturated.
From the second frame, it goes down to 211 and keeps going on.
I set timer as one shot mode to switch from sensing to transceiver, and
vice versa.
Have anyone bumped into this problem?
Thanks in advance,
HoMin
------------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
