Hi all,

I would like to use Avrora with Deluge, because Avrora seems really
better than Tossim (in Tossim, we cannot reboot a Deluge node).
I am quiet a newbie in Avrora and tinyos, but I have read in Avrora doc
that there is a support for mica2 EEPROM. Good for Deluge simulation !
So I have just change the SimpleCmd application by including Deluge  (i
have tried it with TOSSIM and it works), to test it with Avrora.

But the problem is that it seems Avrora with Deluge fails in the EEPROM
initialization, because I don't know how to install the Golden Image in
the node !
The result is that when I try to lauch the "BcastInject led_on", the
packet is received by the node, but it doesn't answer by a ACK, like it
is frozen by a wrong EEPROM access.

Here is below the output of the Avrora Deluge node.
As you can see, in the EEPROM initialization, the Tick stays to -1,
after a write access... I don't know more about the inner details, it is
Deluge specific, I think.
Also at the end, a packet is received by the node (it is the packet from
the BcastInject) but no ACK is send back ???? ...

Thanks a lot for a response... it could be very great to simulate Deluge
inside Avrora. Like this, network reprogrammation could be really tested .
Cheers
Phong

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[EMAIL PROTECTED]:~/Documents/tinyos/cvs/tinyos-1.x/apps/SimpleCmd>
Avrora -nodecount=1 -monitors=serial -real-time
-verbose=atmel.usart0,atmel.usart1,atmel.eeprom SimpleCmd.Deluge.od

Loading SimpleCmd.Deluge.od...[OK: 3.051 seconds]
=={ Simulation events
}=======================================================
Node          Time   Event
------------------------------------------------------------------------------
Waiting for serial connection on port 2390...connected to /127.0.0.1:48968
  0        451057  Tick : -1
  0        451058  EEPROM: EECR written to, val = 1
  0        451058  EEPROM: EERE flagged
  0        451059  Tick : -1
  0        451059  EEPROM: 0 read from 4064
  0        451084  Tick : -1
  0        451085  EEPROM: EECR written to, val = 1
  0        451086  Tick : -1
  0        451111  Tick : -1
  0        451112  EEPROM: EECR written to, val = 1
  0        451113  Tick : -1
  0        451138  Tick : -1
  0        451139  EEPROM: EECR written to, val = 1
  0        451140  Tick : -1
  0        451165  Tick : -1
  0        451166  EEPROM: EECR written to, val = 1
  0        451167  Tick : -1
  0        451419  Tick : -1
  0        451420  EEPROM: EECR written to, val = 1
  0        451421  Tick : -1
  0        451446  Tick : -1
  0        451447  EEPROM: EECR written to, val = 1
  0        451448  Tick : -1
  0        451473  Tick : -1
  0        451474  EEPROM: EECR written to, val = 1
  0        451475  Tick : -1
  0        451500  Tick : -1
  0        451501  EEPROM: EECR written to, val = 1
  0        451502  Tick : -1
  0        451527  Tick : -1
  0        451528  EEPROM: EECR written to, val = 1
  0        451529  Tick : -1
  0        451554  Tick : -1
  0        451555  EEPROM: EECR written to, val = 1
  0        451556  Tick : -1
  0        451581  Tick : -1
  0        451582  EEPROM: EECR written to, val = 1
  0        451583  Tick : -1
  0        451608  Tick : -1
  0        451609  EEPROM: EECR written to, val = 1
  0        451610  Tick : -1
  0        451635  Tick : -1
  0        451636  EEPROM: EECR written to, val = 1
  0        451637  Tick : -1
  0        451662  Tick : -1
  0        451663  EEPROM: EECR written to, val = 1
  0        451664  Tick : -1
  0        897380  Red: on
  0        897382  Yellow: on
  0        897384  Green: on
  0        897386  Red: off
  0        897388  Yellow: off
  0        897390  Green: off
  0        897516  USART0: period set to 16
  0        897519  USART0: multiplier set to 8
  0        934549  USART0: period set to 16
  0        934552  USART0: multiplier set to 8
  0     149208320  USART0: Received frame 0x7E [01111110] (126) '~' 0 15 8
  0     149211392  USART0: Received frame 0x41 [01000001] (65) 'A' 0 15 8
  0     149214464  USART0: Received frame 0x0E [00001110] (14)  0 15 8
  0     149217536  USART0: Received frame 0xFF [11111111] (-1)  0 15 8
  0     149220608  USART0: Received frame 0xFF [11111111] (-1)  0 15 8
  0     149223680  USART0: Received frame 0x08 [00001000] (8) '\b' 0 15 8
  0     149226752  USART0: Received frame 0x7D [01111101] (125) '}' 0 15 8
  0     149229824  USART0: Received frame 0x5D [01011101] (93) ']' 0 15 8
  0     149232896  USART0: Received frame 0x0B [00001011] (11)  0 15 8
  0     149235968  USART0: Received frame 0x19 [00011001] (25)  0 15 8
  0     149239040  USART0: Received frame 0x01 [00000001] (1)  0 15 8
  0     149242112  USART0: Received frame 0x00 [00000000] (0)  0 15 8
  0     149245184  USART0: Received frame 0x00 [00000000] (0)  0 15 8
  0     149248256  USART0: Received frame 0x00 [00000000] (0)  0 15 8
  0     149251328  USART0: Received frame 0x00 [00000000] (0)  0 15 8
  0     149254400  USART0: Received frame 0x00 [00000000] (0)  0 15 8
  0     149257472  USART0: Received frame 0x00 [00000000] (0)  0 15 8
  0     149260544  USART0: Received frame 0x00 [00000000] (0)  0 15 8
  0     149263616  USART0: Received frame 0x00 [00000000] (0)  0 15 8
  0     149266688  USART0: Received frame 0x00 [00000000] (0)  0 15 8
  0     149269760  USART0: Received frame 0x83 [10000011] (-125)  0 15 8
  0     149272832  USART0: Received frame 0x1B [00011011] (27)  0 15 8
  0     149275904  USART0: Received frame 0x7E [01111110] (126) '~' 0 15 8

_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to