Is BaseStation supposed to be sending something back?
Make sure there are messages being sent from the mote someplace.
And also check the silly-slide-switch on the MIB, I believe it
should be in the OFF position.
MS
Sumesh Philip wrote:
I'm trying to carry out tutorial 4 using a mib510 programmer, micaz mote
and an Aten uc232A usb-to-serial adapter. For both TestSerial and
BaseStation, the mote is getting packets from the PC (indicated by the
blinking leds), but there is no read out of the serial port of the PC.
[EMAIL PROTECTED] TestSerial]$ java TestSerial -comm serial@/dev/ttyUSB0:micaz
serial@/dev/ttyUSB0:57600: resynchronising
Sending packet 0
Sending packet 1
Sending packet 2
Sending packet 3
Sending packet 4
Sending packet 5
Sending packet 6
I saw a couple of similar posts sometime back but didn't see any
responses. Can someone help?
Thanks.
------------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
--
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
