Yes, please verify that the switch at the front of your MIB510 programming board is switched to the OFF position in order to enable Mote-to-pc communication. PC-mote communication can occur with the switch in either position.
Kevin On 8/10/07, Michael Schippling <[EMAIL PROTECTED]> wrote: > Is BaseStation supposed to be sending something back? > Make sure there are messages being sent from the mote someplace. > And also check the silly-slide-switch on the MIB, I believe it > should be in the OFF position. > MS > > > Sumesh Philip wrote: > > I'm trying to carry out tutorial 4 using a mib510 programmer, micaz mote > > and an Aten uc232A usb-to-serial adapter. For both TestSerial and > > BaseStation, the mote is getting packets from the PC (indicated by the > > blinking leds), but there is no read out of the serial port of the PC. > > > > [EMAIL PROTECTED] TestSerial]$ java TestSerial -comm > > serial@/dev/ttyUSB0:micaz > > serial@/dev/ttyUSB0:57600: resynchronising > > Sending packet 0 > > Sending packet 1 > > Sending packet 2 > > Sending packet 3 > > Sending packet 4 > > Sending packet 5 > > Sending packet 6 > > > > I saw a couple of similar posts sometime back but didn't see any > > responses. Can someone help? > > > > Thanks. > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > -- > Platform: WinXP/Cygwin > TinyOS version: 1.x, Boomerang > Programmer: MIB510 > Device(s): Mica2, MicaZ, Tmote > Sensor board: homebrew > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- ~Kevin _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
