That would be great. How will I be able to get the driver, though? On 8/17/07, Kevin Klues <[EMAIL PROTECTED]> wrote: > I am looking into this and plan to have a driver implemented and > tested by Monday. > > Kevin > > On 8/17/07, Philip Levis <[EMAIL PROTECTED]> wrote: > > On Aug 17, 2007, at 11:56 AM, Saikat Ray wrote: > > > > > Hi, > > > > > > I have a quick question. In Spring 2007 we purchased the classroom kit > > > from Crossbow (MIB510CA programming board, MDA 100 sensor board, 2.4 > > > GHz MICA mote). We used TinyOS 2.0, but could not access the sensors > > > (i.e., could not read the sensor readings). When we contacted > > > Crossbow, they said that they do not support TinyOS 2.0 and there is > > > no "driver" for the sensor board in TinyOS 2.0. > > > > > > This semester (fall 2007) we will again pick up our work. I was > > > wondering if indeed we cannot read the sensors on the MDA 100 board > > > (in which case we would go back to TinyOS 1.1). Any advice is > > > appreciated. > > > > There currently isn't support for the thermistor or light sensor on > > the MDA100CA/MDA100CB. > > > > That being said, implementing support would be very easy. What's your > > timeframe? I'd do it myself, but I'm about to travel for two weeks > > and don't have some micaZs and MDA100s with me. > > > > Phil > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > -- > ~Kevin >
-- Dr. Saikat Ray Assistant Professor Department of Electrical Engineering and Computer Engineering University of Bridgeport Cell: 215-279-1032 Office: 203-576-4165 _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
