David,
Thanks for your time!!
You were right I was using an old version of CC2420ControlP, since I was
compiling using the BaseStationCC2420 that incorporates the
CC2420ControlP old version.
I just simply used the new BaseStation and the ack started to appear...
so once again thanks!
I notest the flag -DCC2420_NO_ADDRESS_RECOGNITION, on the BaseStation
Makefile, does this flag only work on the BaseStation code or can I use
on different application using the CC2420ActiveMessageC component?
Because I tried with no success. I also tried using the
CC2420Config.setAddressRecognition(bool on) through CC2420ControlC, as u
suggested in a previous mail.
Thanks in advance,
Tiago
David Moss wrote:
Tiago -
BaseStationCC2420 was removed in 2.0.2 because it is no longer necessary.
It was originally there because the CC2420ControlP module needed some
special modifications. Now, because those modifications are now controlled
by software and/or preprocessor variables in the 2.0.2 CC2420 stack,
BaseStationCC2420 is deprecated.
It looks to me like some files in your CC2420 stack are not up to date with
version 2.0.2. Specifically, the CC2420ControlP you're using is old enough
not to incorporate the newest interfaces defined by CC2420Config - that's
where the errors are coming from. If you're 100% sure that your
tos/chips/cc2420 stack is up to date, can you be sure that CC2420ControlP is
not being pulled from some other location? First verify your
tos/chips/cc2420/control/CC2420ControlP provides the interfaces that
CC2420Config is complaining about, and if it does then try adding the
following line to your tos/chips/cc2420/control/CC2420ControlP module:
#warning "Using the newest CC2420ControlP"
When you compile, if you see that line printed to the command line at
compile time, you can be sure of which CC2420ControlP file nesC is trying to
use. Attached is the CC2420ControlP you should be using. You can even try
putting that directly in your apps/BaseStation directory to force nesC to
use it instead of some other, older CC2420ControlP.
-David
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tiago
Camilo
Sent: Wednesday, August 22, 2007 7:55 AM
To: [email protected]
Cc: Philip Levis
Subject: [Tinyos-help] acknowledgements in Tinyos2.0.2
usingBaseStationCC2420, not supported?
Hi all,
I am trying to implement acknowledgementsin my telosb motes, using the
tinyos2.0.2.
I am using the component CC2420ActiveMessageC with the interface
PacketAcknowledgements as suggested in the TestAcks application of
folder cc2420. However i can make this work using the BaseStationCC2420
application ( tinyos2.0.1). The source does not receive any
acknowledgments from the BaseStation. I found out that in the makefile
there is the declaration: CFLAGS += -DCC2420_NO_ACKNOWLEDGEMENTS, which
explains the lack of ack. However when i try to compile
BaseStationCC2420 without this option i have this error:
compiling BaseStationC to a telosb binary
ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow
-DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=telosb
-fnesc-cfile=build/telosb/app.c -board= -D'TOSH_DATA_LENGTH=102'
-DIDENT_PROGRAM_NAME=\"BaseStationC\" -DIDENT_USER_ID=\"tandre\"
-DIDENT_HOSTNAME=\"homenux\" -DIDENT_USER_HASH=0xb4d39b1cL
-DIDENT_UNIX_TIME=0x46cc4aafL -DIDENT_UID_HASH=0xeb773d58L
BaseStationC.nc -lm
In file included from
/opt/tinyos-2.x/tos/chips/cc2420/control/CC2420ControlC.nc:53,
from
/opt/tinyos-2.x/tos/chips/cc2420/csma/CC2420CsmaC.nc:61,
from /opt/tinyos-
2.x/tos/chips/cc2420/CC2420ActiveMessageC.nc:58,
from
/opt/tinyos-2.x/tos/platforms/telosa/ActiveMessageC.nc:61,
from BaseStationC.nc:71:
In component `CC2420ControlP':
CC2420ControlP.nc :236: `CC2420Config.getShortAddr': async mismatch with
declaration
/opt/tinyos-2.x/tos/chips/cc2420/interfaces/CC2420Config.nc:64: previous
declaration of `CC2420Config.getShortAddr'
CC2420ControlP.nc:244: `CC2420Config.getPanAddr': async mismatch with
declaration
/opt/tinyos-2.x/tos/chips/cc2420/interfaces/CC2420Config.nc:70: previous
declaration of `CC2420Config.getPanAddr'
CC2420ControlP.nc:76: `CC2420Config.setAutoAck' not implemented
CC2420ControlP.nc:76: `CC2420Config.isAddressRecognitionEnabled' not
implemented
CC2420ControlP.nc:76: `CC2420Config.setAddressRecognition' not implemented
CC2420ControlP.nc:76: `CC2420Config.isAutoAckEnabled' not implemented
CC2420ControlP.nc:76: `CC2420Config.isHwAutoAckDefault' not implemented
In component `CC2420ControlC':
/opt/tinyos-2.x/tos/chips/cc2420/control/CC2420ControlC.nc:98: cannot
find `ActiveMessageAddress'
make: *** [exe0] Error 1
I know that the CC2420 stack was changed in this last version. Are we
still waiting for a updated BaseStationCC2420 (since in 2.0.2 cvs it
seems to be deleted), or am I missing something?
Thanks in advance,
Tiago Camilo
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
