Todd Roper wrote: > ...running an MSP430 connected to a CC1000 running T-Mote Sky, an msp430 mote, yes. don't know about CC1000 though :(
> I had some similar problems with a modified AntiTheft demo a few months ago. > I hooked up a snooping BaseStation and found that the node that I "thought" > was not communicating had been trying to send packets to a node that was not > in the mesh (seemed like routing table corruption of some sort). > > I am running the basic 2.02 release with the modified ( > 255 node support ) > file in the /lib/net/le. This was just checked in the other day. Lately, I > have not seen the "node death" problem that I had experienced before, though. so maybe I should upgrade? I don't need > 255 node support, will only be using about 40. also, the error came up using just 3 motes. > A few questions, though: > Have you modified the data rate for the RF communication? no > Are you running in a Low Power Listening mode? no the modifications to the multihop oscilloscope app are minimal - basically the data structure is modified only, as it is sending data from 3 sensors instead of one. but nothing else is changed. (and I do get the same problem with the 'stock' multihop oscilloscope application) thanks for the help, Akos _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
