I just looked at the tmote specs and it shows a bit higher current
when _receiving_ (!!?), but in the range you have measured. Judicious
use of the radio is the issue, also look up "Low Power Listening" and
see if it is of any use.
MS
Leonardo wrote:
Hi Guys,
I have any problem with current consumption on telosb. I made some tests
and the normal energy consumption is 19,5 mA when radio interface cc2420
is up, while when cc2420 is down the consumption is 0,125 mA. How can i
lower the max Value?
i try to set the power to the lowest level with this function
command result_t SetRFPower
<imap://[EMAIL PROTECTED]:993/fetch%3EUID%3E/TinyOS%3E6076?header=quotebody&part=1.1.1.2&filename=moteiv.tos.lib.CC2420Radio.CC2420Control.html>(
uint8_t power)
but the consumption is the same.Have you any suggest?
thank you
Bye
------------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
