How do you connect a micaz directly to a USB port?
MS
Abdullah Kadri wrote:
I am not getting any information at all only "re-synchronizing..." I am
using micaz with Atmega128L on-board. I am using COM6 and
MOTECOM variable is correct.i do not have MIB, just the board connected
directly to the USB port. The Oscilloscope GUI opens without any data on
screen. Please any hint.
----- Original Message -----
From: Michael Schippling <[EMAIL PROTECTED]>
Date: Thursday, November 15, 2007 5:02 pm
Subject: Re: [Tinyos-help] Oscilloscope Application
To: Abdullah Kadri <[EMAIL PROTECTED]>
Cc: [email protected]
> You should get data, if not information, w/o a sensor attached.
> If you are using the T1 Oscope app that goes directly to the
> UART port you should see something on the PC side no matter.
> Check that you are using the right port and MOTECOM variable.
> I forget what platform you are on, if you have a MIB510 host-
> adapter make sure the silly-slide-switch opposite the serial
> conn is in the OFF position.
>
> MS
>
>
> Abdullah Kadri wrote:
> > I have a problem with oscilloscope application. When I run the
> Listen
> > process I do not see any traffic. And even when I open the
> Oscilloscope
> > GUI I do not see any signal. The Leds on the board are
> blinking and I am
> > using Micaz board. I do not have a photo sensor onboard. Does
> this
> > affect the process?
> >
> >
> >
> > Abdullah Kadri, P.Eng., Ph.D. Candidate
> > The University of Western Ontario
> > Department of Electrical and Computer Engineering
> > Phone: (519) 661-2111 ext. 81271
> >
> >
> >
> >
> > ---------------------------------------------------------------
> ---------
> >
> > _______________________________________________
> > Tinyos-help mailing list
> > [email protected]
> > https://www.millennium.berkeley.edu/cgi-
> bin/mailman/listinfo/tinyos-help
>
Abdullah Kadri, P.Eng., Ph.D. Candidate
The University of Western Ontario
Department of Electrical and Computer Engineering
Phone: (519) 661-2111 ext. 81271
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
