Hi everyone: Hope to gain some warm responses from you!
I encountered a problem after intalling MoteWorks, I want to visit the Webside such as http://localhost:8080 through Xserve WEB Interface as said in the MoteWorks Guide. Before visiting this URL, the xserve must be started. the corresponding command in Cygwin is -h, but here always appears the following output: $ xserve -h [2008/02/21 01:40:15] xdebug: could not open log file /opt/MoteWorks/tools/xser ve/bin/logs/xserve_log.txt: No such file or directory XSERVE 2.0.E: $Id: xserve.c,v 1.8.2.3 2007/02/02 17:45:01 rkapur Exp $ Using params: [xml raw] [xml parsed] [xml converted] [server port=9001] Opening serial device: /dev/ttyS0 @ 57600 [2008/02/21 01:40:18] xserve: Couldn't open serial port /dev/ttyS0:57600 XMonitor: XServ failure. Evaluating process exit... Exit status - Application Level Exit. No restart requested. Signal Status - Normal. wait: No error So I want to ask some quesiones based on the above output: 1.What does the meaning of this output stand for? it seems that the xserve.exe under the path.//opt/MoteWorks/tools/xserve/bin/bin, has not been run. 2.what is /dev/ttyS0:57600, how to use it? 3.How to start Xserve normally in MoteWorks with the Cygwin command to visit the web interface provided by Xserve? 4.is there a special CygWin.dll for Xserve? if so, how to gain it? How to configure it in the MoteView and MoteWork for normal operation? Looking forwark for your help and reply!! Thank you very much! Best Regards; Maggie
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
