I have not used the web server option before, but I'll try to help. 1) Which 'base station unit' are you using? MIB510 or MIB600? 2) a) If MIB510, does your PC or laptop have a serial port? 2) b) If MIB600, you need to change the arguments to xserve to point to that device's IP address. Chee
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Yu Qun Sent: 21 February 2008 06:55 To: [email protected] Subject: [Tinyos-help] some questiones about Xserve Hi everyone: Hope to gain some warm responses from you! I encountered a problem after intalling MoteWorks, I want to visit the Webside such as http://localhost:8080 <http://localhost:8080/> through Xserve WEB Interface as said in the MoteWorks Guide. Before visiting this URL, the xserve must be started. the corresponding command in Cygwin is -h, but here always appears the following output: $ xserve -h [2008/02/21 01:40:15] xdebug: could not open log file /opt/MoteWorks/tools/xser ve/bin/logs/xserve_log.txt: No such file or directory XSERVE 2.0.E: $Id: xserve.c,v 1.8.2.3 <http://1.8.2.3> 2007/02/02 17:45:01 rkapur Exp $ Using params: [xml raw] [xml parsed] [xml converted] [server port=9001] Opening serial device: /dev/ttyS0 @ 57600 [2008/02/21 01:40:18] xserve: Couldn't open serial port /dev/ttyS0:57600 XMonitor: XServ failure. Evaluating process exit... Exit status - Application Level Exit. No restart requested. Signal Status - Normal. wait: No error So I want to ask some quesiones based on the above output: 1.What does the meaning of this output stand for? it seems that the xserve.exe under the path.//opt/MoteWorks/tools/xserve/bin/bin, has not been run. 2.what is /dev/ttyS0:57600, how to use it? 3.How to start Xserve normally in MoteWorks with the Cygwin command to visit the web interface provided by Xserve? 4.is <http://4.is> there a special CygWin.dll for Xserve? if so, how to gain it? How to configure it in the MoteView and MoteWork for normal operation? Looking forwark for your help and reply!! Thank you very much! Best Regards; Maggie ******************************************************************************* Please consider the environment before printing this email. ******************************************************************************* This email and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and may not be divulged to any third party without the express permission of the originator. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Thales Research & Technology (UK) Limited. *******************************************************************************
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
