Store it in flash memory. Load it when mote reboots. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Shaun > Lawrence > Sent: 03 March 2008 17:33 > To: [email protected] > Subject: RE: [Tinyos-help] Permanently change group ID > > > Right, > > I guess I needed to describe what I am looking for a little > bit clearer. I > know how to change the Group ID on compile time (ie > DEFAULT_LOCAL_GROUP=0x22) and how to change it when the mote > is running as I > said before. > > What I am looking for is to change the Group ID when the mote > is powered and > booted and have it keep that ID after it goes through a hard reset > (batteries replaced). > > -Shaun > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Eric > Keller > Sent: Monday, March 03, 2008 11:26 AM > To: [email protected] > Subject: Re: [Tinyos-help] Permanently change group ID > > GroupID is set in /opt/tinyos-1.x/tools/make/Makedefaults or > /opt/tinyos-2.x/support/make/Makedefaults. > Eric > On Mon, Mar 3, 2008 at 10:59 AM, Shaun Lawrence > <[EMAIL PROTECTED]> > wrote: > > > > > > > > Hopefully this is a quick question: > > > > I am able to change the Group ID during compile and change > the Group ID > over > > a UART command by invoking ActiveMessageAddress.setAddress. > However, that > > does not permanently change the Group ID; only during that > runtime. Is > there > > a way to permanently change it? > > > > > > Thanks, > > > > Shaun > > > > > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/t > inyos-help > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/t > inyos-help > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/t > inyos-help >
******************************************************************************* Please consider the environment before printing this email. ******************************************************************************* This email and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and may not be divulged to any third party without the express permission of the originator. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Thales Research & Technology (UK) Limited. ******************************************************************************* _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
