See my just previous answer to "hello". You are probably not specifying
the right programmer device.
MS
Hristo Bojkov wrote:
Hello,
I need assistance with avrdude. This is my first experience with the avr
cpu's and related toolchain.
I am trying to upload basestation to a mote with command:
$ avrdude -c dapa -U hfuse:w:0xd9:m -pm1281 -U efuse:w:0xff:m
-Cc:/cygwin/etc/avrdude/avrdude.conf -U
flash:w:build/iris/main.srec.out-0:a -P com26
The result from execution is:
avrdude.exe: can't open device "com26"
avrdude.exe: failed to open parallel port "com26"
I have this version of avrdude:
$ avrdude -v
avrdude.exe: Version 5.4, compiled on Nov 5 2007 at 20:32:26
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is "c:\WinAVR\bin\avrdude.conf"
avrdude.exe: no programmer has been specified on the command line or the
config file
Specify a programmer using the -c option and try again
Any help is more than welcome
Hristo Bojkov
Senior Embedded Designer
IdXS, Bulgaria
.......TOS environment....................................
OS : WinXP + cygwin
TOS: 2.0.2
Dev : tmote sky
Java: jdk1.5.0_06
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
--
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
