Hi Hristo,

According to the avrdude command line quoted below, you are trying to
program the mote using the dapa parallel programmer which is connected
to com26. It is very unlikely that this is what you want to do, because
it's not possible to hook up a parallel programmer on a com port.

What kind of programming board do you have?


Janos
 
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Hristo
Bojkov
Sent: Tuesday, March 04, 2008 6:23 AM
To: Faisal Aslam
Cc: [email protected]
Subject: Re: [Tinyos-help] avrdude problem


Thank you Faisal Aslam,
but this is not letter-case problem. I have tried even with /dev/com26
and 
/dev/COM26, without success. May be it is related somehow to the version
of 
the avrdude, the one I am using is installed from link given in xbow
iris 
installation guide.

Hristo

--------------------------------------------------
From: "Faisal Aslam" <[EMAIL PROTECTED]>
Sent: Tuesday, March 04, 2008 2:00 PM
To: "Hristo Bojkov" <[EMAIL PROTECTED]>
Subject: Re: [Tinyos-help] avrdude problem

> I think com should be capital i.e. COM26. I do not know if that is the

> problem in this case but give it a try.
>
> best regards,
> Faisal
>
> Hristo Bojkov wrote:
>> Hello,
>> I need assistance with avrdude. This is my first experience with the
avr 
>> cpu's and related toolchain.
>> I am trying to upload basestation to a mote with command:
>> $ avrdude -c dapa -U hfuse:w:0xd9:m -pm1281 -U 
>> efuse:w:0xff:m -Cc:/cygwin/etc/avrdude/avrdude.conf -U 
>> flash:w:build/iris/main.srec.out-0:a -P com26
>>
>> The result from execution is:
>> avrdude.exe: can't open device "com26"
>>
>> avrdude.exe: failed to open parallel port "com26"
>>
>> I have this version of avrdude:
>> $ avrdude -v
>>
>> avrdude.exe: Version 5.4, compiled on Nov  5 2007 at 20:32:26
>>             Copyright (c) 2000-2005 Brian Dean,
http://www.bdmicro.com/
>>
>>             System wide configuration file is 
>> "c:\WinAVR\bin\avrdude.conf"
>>
>> avrdude.exe: no programmer has been specified on the command line or
the 
>> config file
>>             Specify a programmer using the -c option and try again
>>
>> Any help is more than welcome
>>
>>
>> Hristo Bojkov
>> Senior Embedded Designer
>> IdXS, Bulgaria
>>
>>
>> .......TOS environment....................................
>> OS  : WinXP + cygwin
>> TOS: 2.0.2
>> Dev : tmote sky
>> Java: jdk1.5.0_06
>>
>>
>> _______________________________________________
>> Tinyos-help mailing list
>> [email protected]
>>
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus 
> signature database 2918 (20080303) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
> 
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to