If your transmitter Mote (programmed with CntToLedsAndRfm) blinks like a counter, but the receiver Mote (programmed with RfmToLeds) doesn't emulate the LED pattern, it is most likely due to the RF band/channel that you forgot to specify. If you were using contrib/xbow apps, these are defined in MakeXbowlocal file. I believe you should be able to create similar Makelocal file for your app. Good luck, Giri
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Prashant Pillai Sent: Monday, March 24, 2008 1:55 AM To: [email protected] Subject: [Tinyos-help] CntToLedsAndRfm and RfmToLeds not working Hi All, I am having some probelms with radio comms. for the Mica2 mote. I have installed CntToLedsAndRfm in Mote 1 and RfmToLeds on Mote 2, but on switching them on, the Mote 2 does not show anything on the leds. I have also reversed the programs and tried with other sets of motes. Interesting the program works for my MICAZ motes. The problem is only with the MICA2 ones that I have. I am not using the xbow contributions at the moment, so the CntToLedsAndRfm and the RfmToLeds are the ones present in the tinyos apps. is it because of this? I remember earlier when I used to use the xbow contribs on another old machine there was a MakeXbowLocal file. I tried copyin that over to my new machine but starting getting several errors. Can someone please help me with this? Thanking you in advance. Regards Prashant Pillai
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
