If you're using T1 (and probably T2 as well) make sure you have defined
the same radio channel and kicked the xmit power up. That's pretty much
what the xbow makefile does for mica2's. Look for:
CFLAGS = -DCC1K_DEFAULT_FREQ=RADIO_916BAND_CHANNEL_0
CFLAGS += -DRADIO_XMIT_POWER=0xFF
MS
Prashant Pillai wrote:
Hi All,
I am having some probelms with radio comms. for the Mica2 mote. I have
installed CntToLedsAndRfm in Mote 1 and RfmToLeds on Mote 2, but on
switching them on, the Mote 2 does not show anything on the leds. I have
also reversed the programs and tried with other sets of motes.
Interesting the program works for my MICAZ motes. The problem is only
with the MICA2 ones that I have. I am not using the xbow contributions
at the moment, so the CntToLedsAndRfm and the RfmToLeds are the ones
present in the tinyos apps. is it because of this? I remember earlier
when I used to use the xbow contribs on another old machine there was a
MakeXbowLocal file. I tried copyin that over to my new machine but
starting getting several errors.
Can someone please help me with this?
Thanking you in advance.
Regards
Prashant Pillai
------------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
--
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
