That's a little fast for mica2s but should be ok for devices with the CC2420 radio. But you should see the full packet no matter what. What are you using to look at the received messages and how are you changing the lengths?
MS Poonam Hiwal wrote: > Hello Everyone, > > I have one question regarding how much tinyos code take time to execute > a application. Becaus ein my application, the timer is fired after every > 32 millisecond and receiver node is receiving nearly 30 packets each of > 40 bytes. It is receiving only the header of the packets not the > content. but If I amm reducing the load, it is receiving the complete > packets, I am not able to understand why it is happening? Is there any > congestion at receiver (sink) or all this is due to timer. > > If anyone can help me in solving this, that would be good. > > Thanks, > Poonam > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help -- Platform: WinXP/Cygwin TinyOS version: 1.x, Boomerang Programmer: MIB510 Device(s): Mica2, MicaZ, Tmote Sensor board: homebrew _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
