$tos-deluge /dev/ttyUSB0 iris -i 1 apps/Blink/build/iris/tos_image.xml
ERROR: Wrong baudrate
Then i tried
$tos-deluge /dev/ttyUSB0 57600 iris -i 1 apps/Blink/build/iris/tos_image.xml
ERROR: Unable to initialize serial port connection to /dev/ttyUSB0
Pls help
Reema
--- On Fri, 16/5/08, Janos Sallai <[EMAIL PROTECTED]> wrote:
From: Janos Sallai <[EMAIL PROTECTED]>
Subject: RE: [Tinyos-help] tests/deluge/Blink
To: [EMAIL PROTECTED]
Cc: [email protected]
Date: Friday, 16 May, 2008, 9:10 PM
Reema,
Try to use tos-deluge directly. Apparently, the helper scripts under /apps/test/deluge haven’t been updated yet. The baud rate of the iris is the same as that of the micaz (57600bps).
Janos
From: Reema Mathew - Michael [mailto:[EMAIL PROTECTED]
Sent: Friday, May 16, 2008 5:48 AM
To: Janos Sallai
Cc: [email protected]
Subject: RE: [Tinyos-help] tests/deluge/Blink
|
I am able to make iris
when i run ./burn /dev/ttyUSB0 iris
the following error is displayed "Wrong baudrate" at Uploading image section
Reema
--- On Fri, 16/5/08, Janos Sallai <[EMAIL PROTECTED]> wrote:
From: Janos Sallai <[EMAIL PROTECTED]>
Subject: RE: [Tinyos-help] tests/deluge/Blink
To: [EMAIL PROTECTED], [email protected]
Date: Friday, 16 May, 2008, 1:06 AM
Reema,
Please make sure that you have the latest sources from the CVS. You need to update your entire tinyos-2.x tree, not only the iris specific directories.
I have verified that it does compile with the latest sources.
Janos
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Reema Mathew - Michael
Sent: Thursday, May 15, 2008 4:22 AM
To: [email protected]
Subject: [Tinyos-help] tests/deluge/Blink
Hi All,
I am trying deluge for iris motes with tinyos2.0.2
I am able to compile tosboot
When I try to make iris for Blink in apps/tests/deluge/Blink
|
Sent from Yahoo! Mail.
A Smarter Email. |
Sent from
Yahoo! Mail.
A Smarter Email.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
