Hello Janos Sallai : thak you for your reply !! I want to ask some question : 1.Have you tested the application of apps/tests/deluge/Blink on micaz or iris or telesb ? is it ok ? i test it according to the way you tell me in last emial . it is as before . when i use the command tos-deluge /dev/ttyS0 micaz -r 1 , the red led flashes quickly and never stop . 2. what is the version of tinyos you are using ? tinyos-2.x cvs or git ( http://hinrg.cs.jhu.edu/git/tinyos-2.x.git) ? i have tested cvs version (2008.04.28) , it has the problem as i say before.
i also tested git version . when i use ./configure in the directory of /opt/tinyos-2.x/tools, it has some problems . 3.what are the tools you have installed in cygwin ? what is the version of cygwin ? cygwin-1.2a.tgz ? thank you very much!! 2008/5/20 Janos Sallai <[EMAIL PROTECTED]>: > Jiwen, > > > > Here's the list of commands you need to enter to get > apps/tests/deluge/Blink work on the iris (I have a mib250 on com3 and > com4=/dev/ttyS3, I'm using cygwin): > > > > Go to the directory > > $ cd /opt/tinyos-2.x/apps/tests/deluge/Blink/ > > > > Compile and install the deluge-enabled blink (TINYOS_NP=bnp tells the make > system to intall the bootloader, CFLAGS=-DELUGE_BASESTATION tells deluge to > listen on the UART) > > $ TINYOS_NP=bnp CFLAGS=-DELUGE_BASESTATION make iris install.0 mib520,COM3 > > > > Compile yellow-blinking blink that is going to be uploaded. The > -DBLINK_REVERSE macro is the one that makes it blink the yellow led, not the > red one. > > $ CFLAGS=-DELUGE_BASESTATION\ -DBLINK_REVERSE make iris > > > > Inject the new image with tos-deluge. > > $ tos-deluge /dev/ttyS3 57600 -i 1 build/iris/tos_image.xml > > > > Reboot the mote. > > $ tos-deluge /dev/ttyS3 57600 -r 1 > > > > Janos > > > > *From:* jiwen zhang [mailto:[EMAIL PROTECTED] > *Sent:* Saturday, May 17, 2008 8:11 AM > *To:* Janos Sallai > *Cc:* [EMAIL PROTECTED]; [email protected] > *Subject:* Re: [Tinyos-help] tests/deluge/Blink > > > > Hell all : > > when i tried the /apps/tests/deluge/blink , it is all right except that > "after the sencond the second version of blink has been downloaded to the > volume 1", *the red led blink ceaselessly. (the mote should reboot with > new blink existing in volume 1 and then the yellow led blink periodically ) > * i can ping the mote , there is no response , what is reason ? > > > > later , i find that when i use the command "tos-deluge /dev/ttyS0 micaz > -r 1" , the mote will blink the red led ceaselessly . i don't know why . > does any one has the same puzzle . > > 2008/5/16 Janos Sallai <[EMAIL PROTECTED]>: > > Reema, > > > > Try to use tos-deluge directly. Apparently, the helper scripts under > /apps/test/deluge haven't been updated yet. The baud rate of the iris is the > same as that of the micaz (57600bps). > > > > Janos > > > > *From:* Reema Mathew - Michael [mailto:[EMAIL PROTECTED] > *Sent:* Friday, May 16, 2008 5:48 AM > *To:* Janos Sallai > *Cc:* [email protected] > > > *Subject:* RE: [Tinyos-help] tests/deluge/Blink > > > > I am able to make iris > > > > when i run ./burn /dev/ttyUSB0 iris > > the following error is displayed "Wrong baudrate" at Uploading image > section > > > > Reema > > > > --- On *Fri, 16/5/08, Janos Sallai <[EMAIL PROTECTED]>* wrote: > > From: Janos Sallai <[EMAIL PROTECTED]> > Subject: RE: [Tinyos-help] tests/deluge/Blink > To: [EMAIL PROTECTED], [email protected] > Date: Friday, 16 May, 2008, 1:06 AM > > Reema, > > > > Please make sure that you have the latest sources from the CVS. You need to > update your entire tinyos-2.x tree, not only the iris specific directories. > > > > I have verified that it does compile with the latest sources. > > > > Janos > > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *Reema Mathew - > Michael > *Sent:* Thursday, May 15, 2008 4:22 AM > *To:* [email protected] > *Subject:* [Tinyos-help] tests/deluge/Blink > > > > Hi All, > > > > I am trying *deluge* for iris motes with tinyos2.0.2 > > I am able to compile *tosboot* > > When I try to *make iris* for Blink in apps/tests/deluge/Blink > > > > > ------------------------------ > > Sent from Yahoo! > Mail<http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http:/us.rd.yahoo.com/evt=52418/*http:/uk.docs.yahoo.com/nowyoucan.html>. > > A Smarter Email. > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > -- > zhang jiwen > -- zhang jiwen
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
