Hi again all, [ request mode on ]
If someone could share a program which simply adjust the gain (magnetometer or microphone) by I2C, on IRIS mote and MTS310, I would be very very grateful (I'm on this problem for a week now, so I start to depress). [ request mode off ] After many tries, I must admit I still don't know how to adjust the AD5242 via I2C, cause my program never enters the "I2C.commandComplete()" function (Atm128I2CMasterPacketP.nc) and I don't know why. Maybe the interrupts ? A weird thing though : when I push the MTS310's 51-pin connector or if I move it into its socket a little when the mote is turned on, the program does enter the "I2C.commandComplete()" function ; so I guess by moving the connector I simulated some interrupts on the I2C bus or whatever... But if I don't touch the mote, nothing happen, and I don't know why. Is there a mistake in the I2C driver code ? or in my code ? Please if anybody could help me =) Thanks in advance, Raphael _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
