You should ask for code for the AD5242 on any platform. The IRIS is based on micaz and as fas as I know the I2C code paths were not at all modified.
Miklos On Tue, Jul 15, 2008 at 1:33 AM, Raphaël Polonowski <[EMAIL PROTECTED]> wrote: > Hi again all, > > [ request mode on ] > > If someone could share a program which simply adjust the gain > (magnetometer or microphone) by I2C, on IRIS mote and MTS310, I would be > very very grateful (I'm on this problem for a week now, so I start to > depress). > > [ request mode off ] > > After many tries, I must admit I still don't know how to adjust the > AD5242 via I2C, cause my program never enters the > "I2C.commandComplete()" function (Atm128I2CMasterPacketP.nc) and I don't > know why. Maybe the interrupts ? > A weird thing though : when I push the MTS310's 51-pin connector or if I > move it into its socket a little when the mote is turned on, the program > does enter the "I2C.commandComplete()" function ; so I guess by moving > the connector I simulated some interrupts on the I2C bus or whatever... > But if I don't touch the mote, nothing happen, and I don't know why. Is > there a mistake in the I2C driver code ? or in my code ? > > Please if anybody could help me =) > > Thanks in advance, > Raphael > > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
