Hi Razvan,
I'm surprised but glad that it works, i have tried many times after my mail
and it doesnt work for me ...may be there is problem with my cygwin
environment ..would try again ..
can you give the result of rqm -qa on your cygwin envi and other
configuration ?
I have the latest code from CVS component tinyos-2.x .. and nesC 1.2.8
seemed sufficient to compile :) there are talks abt tinyos-2.1 but i dun see
any on the cvs tree ..
am i missing something ?
thanks anyways for taking the pain of setting the envi and reproducing my
case ..
Best Regards,
Gaurav
On Thu, Aug 7, 2008 at 8:57 PM, Razvan Musaloiu-E. <[EMAIL PROTECTED]>wrote:
> Hi!
>
> On Thu, 7 Aug 2008, Gaurav Chandwani wrote:
>
> Hi Razvan,
>>
>> I have nesc-1.2.8b-1 ....
>> Below you can see all the rpms that i have installed ..
>> why r u installing avr rpms's ? i m using a telosb mote and not
>> mica, m sry if i missed mentioning it clearly ..
>>
>
> I tried burn from apps/test/deluge/Blink for telosb and it worked (albeit
> excruciating slow :|). The command I used for a more on COM11 was this:
> ./burn 10 /dev/ttyS10 telosb
>
> I'm surprised that you managed to compile the latest CVS tree with the nesc
> 1.2.8. I though the nesc 1.3 is a must.
>
> --
> Razvan ME
>
>
> $ rpm -qa
>> tinyos-tools-1.2.2-1
>> make-3.80tinyos-1
>> tinyos-javacomm-1.0.0-1
>> moteiv-tools-0.1-20060808
>> msp430tools-base-0.1-20050607
>> msp430tools-libc-20050308cvs-20050608
>> msp430tools-gcc-3.2.3-20050607
>> tinyos-tools-1.2.4-2
>> msp430tools-libc-20060208cvs-20060208
>> tinyos-1.1.15Dec2005cvs-1
>> tinyos-moteiv-2.0.4-1
>> msp430tools-python-tools-1.0-1
>> msp430tools-binutils-2.16-20050607
>> nesc-1.2.8b-1
>> tinyos-2.0.2-2
>>
>> Thanks for your quick response,
>> Best Regards,
>> Gaurav
>>
>> On Wed, Aug 6, 2008 at 8:57 PM, Razvan Musaloiu-E. <[EMAIL PROTECTED]
>> >wrote:
>>
>> Hi!
>>>
>>>
>>> On Wed, 6 Aug 2008, Razvan Musaloiu-E. wrote:
>>>
>>> Hi!
>>>
>>>>
>>>> On Wed, 6 Aug 2008, Gaurav Chandwani wrote:
>>>>
>>>> Hi,
>>>>
>>>>>
>>>>> I am trying to work with deluge/Blink/ ...
>>>>> To run the ./burn script, had to change the port variables(found on
>>>>> mailing list) ..
>>>>> $(PPORT) to 4 (mote connected to COM5)
>>>>> and
>>>>> $(CPORT) to /dev/tty$4 ..
>>>>> are these changes planned to be incorporated in the CVS ?
>>>>>
>>>>> I face a problem with ./burn script. It runs fine until
>>>>> echo ============================= Compile a new Blink
>>>>> ==============================
>>>>> CFLAGS=-DBLINK_REVERSE\ -DDELUGE_BASESTATION make ${PLATFORM}
>>>>>
>>>>> after this ...
>>>>> echo =============================== Upload the image
>>>>> ===============================
>>>>> ${TOS_DELUGE} /dev/tty$4 ${PLATFORM} -i 1
>>>>> build/${PLATFORM}/tos_image.xml
>>>>>
>>>>> gives me *"ERROR: Timeout. Is the node a Deluge T2 base station?"* ,
>>>>> cygwin hangs,
>>>>> Ctrl + C etc nothing works ..i have to close the window and open
>>>>> another
>>>>> one.
>>>>>
>>>>> $ tos-deluge /dev/tty$4 telosb -i 1 build/${PLATFORM}/tos_image.xml
>>>>> Flushing the serial port..
>>>>> Checking if node is a Deluge T2 base station ...
>>>>> ~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠
>>>>> S♠vo~
>>>>> ~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠
>>>>> S♠vo~
>>>>> ~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠
>>>>> S♠vo~
>>>>> ~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠
>>>>> S♠vo~
>>>>> ~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠
>>>>> S♠vo~
>>>>> ~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠
>>>>> S♠vo~
>>>>> ~D☺ ?? ♠ S♠ vo~ERROR: Timeout. Is the node a Deluge T2 base
>>>>> station?
>>>>>
>>>>> i am using latest cygwin, cvs code, have python 2.4.4 and also
>>>>> pyserial,
>>>>> have done the "Tools Installation" part of "Deluge T2 - Programming
>>>>> maual".
>>>>>
>>>>>
>>>> I'm not a regular windows/cygwin user and I need some help to recreate
>>>> your setup in order to reproduce the problem. Can you please tell which
>>>> version of nesc are you using?
>>>>
>>>>
>>>> I compiled by hand the nesc-1.3.0 (the version David Gay just
>>> announced)
>>> and then I installed the avr rpms indicated here:
>>>
>>>
>>> http://docs.tinyos.net/index.php/Installing_TinyOS_2.0.2#Manual_installation_on_your_host_OS_with_RPMs
>>>
>>> When I compiled the Blink I get a funky error about missing inttytes.h (I
>>> have it in /usr/include/) and then a long list of errors related to
>>> __nesc_ntoh_*. :-( Do you know how to solve this?
>>>
>>> --
>>> Razvan ME
>>>
>>>
>>> --
>>>
>>>> Razvan ME
>>>>
>>>> has anybody faced a similar problem ? i couldnt find any clue from the
>>>>
>>>>> mailing list ..
>>>>>
>>>>> Thanks
>>>>>
>>>>> --
>>>>>
>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------------------------------------------------------
>>>>> To accomplish great things, we must not only act, but also dream; not
>>>>> only
>>>>> plan, but also believe.
>>>>> - Anatole France
>>>>>
>>>>
>>>>
>>>>
>>
>> --
>>
>> ---------------------------------------------------------------------------------------------------------------------
>> To accomplish great things, we must not only act, but also dream; not only
>> plan, but also believe.
>> - Anatole France
>
>
--
---------------------------------------------------------------------------------------------------------------------
To accomplish great things, we must not only act, but also dream; not only
plan, but also believe.
- Anatole France
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
