Hi!
On Fri, 8 Aug 2008, Gaurav Chandwani wrote:
Hi Razvan,
I'm surprised but glad that it works, i have tried many times after my mail
and it doesnt work for me ...may be there is problem with my cygwin
environment ..would try again ..
can you give the result of rqm -qa on your cygwin envi and other
configuration ?
Here is what 'rpm -qa' says:
$ rpm -qa
avr-binutils-2.15tinyos-3
msp430tools-base-0.1-20050607
msp430tools-gcc-3.2.3-20050607
avr-gcc-3.4.3-1
msp430tools-python-tools-1.0-1
msp430tools-binutils-2.16-20050607
msp430tools-libc-20050308cvs-20050608
$
I compiled by hand nesc 1.3 and the tinyos tools.
I have the latest code from CVS component tinyos-2.x .. and nesC 1.2.8
seemed sufficient to compile :) there are talks abt tinyos-2.1 but i dun see
any on the cvs tree ..
The 2.1 is in the CVS. It has the tag release_tinyos_2_1_0_0. An easier
way to see it is here:
http://hinrg.cs.jhu.edu/git/?p=tinyos-2.x.git
am i missing something ?
I don't see anything missing but I have very-very limited experience with
TinyOS in Windows.
thanks anyways for taking the pain of setting the envi and reproducing my
case ..
You're welcome. :-) I'm sorry I wasn't able to solve the problem. :-(
--
Razvan ME
On Thu, Aug 7, 2008 at 8:57 PM, Razvan Musaloiu-E. <[EMAIL PROTECTED]>wrote:
Hi!
On Thu, 7 Aug 2008, Gaurav Chandwani wrote:
Hi Razvan,
I have nesc-1.2.8b-1 ....
Below you can see all the rpms that i have installed ..
why r u installing avr rpms's ? i m using a telosb mote and not
mica, m sry if i missed mentioning it clearly ..
I tried burn from apps/test/deluge/Blink for telosb and it worked (albeit
excruciating slow :|). The command I used for a more on COM11 was this:
./burn 10 /dev/ttyS10 telosb
I'm surprised that you managed to compile the latest CVS tree with the nesc
1.2.8. I though the nesc 1.3 is a must.
--
Razvan ME
$ rpm -qa
tinyos-tools-1.2.2-1
make-3.80tinyos-1
tinyos-javacomm-1.0.0-1
moteiv-tools-0.1-20060808
msp430tools-base-0.1-20050607
msp430tools-libc-20050308cvs-20050608
msp430tools-gcc-3.2.3-20050607
tinyos-tools-1.2.4-2
msp430tools-libc-20060208cvs-20060208
tinyos-1.1.15Dec2005cvs-1
tinyos-moteiv-2.0.4-1
msp430tools-python-tools-1.0-1
msp430tools-binutils-2.16-20050607
nesc-1.2.8b-1
tinyos-2.0.2-2
Thanks for your quick response,
Best Regards,
Gaurav
On Wed, Aug 6, 2008 at 8:57 PM, Razvan Musaloiu-E. <[EMAIL PROTECTED]
>wrote:
Hi!
On Wed, 6 Aug 2008, Razvan Musaloiu-E. wrote:
Hi!
On Wed, 6 Aug 2008, Gaurav Chandwani wrote:
Hi,
I am trying to work with deluge/Blink/ ...
To run the ./burn script, had to change the port variables(found on
mailing list) ..
$(PPORT) to 4 (mote connected to COM5)
and
$(CPORT) to /dev/tty$4 ..
are these changes planned to be incorporated in the CVS ?
I face a problem with ./burn script. It runs fine until
echo ============================= Compile a new Blink
==============================
CFLAGS=-DBLINK_REVERSE\ -DDELUGE_BASESTATION make ${PLATFORM}
after this ...
echo =============================== Upload the image
===============================
${TOS_DELUGE} /dev/tty$4 ${PLATFORM} -i 1
build/${PLATFORM}/tos_image.xml
gives me *"ERROR: Timeout. Is the node a Deluge T2 base station?"* ,
cygwin hangs,
Ctrl + C etc nothing works ..i have to close the window and open
another
one.
$ tos-deluge /dev/tty$4 telosb -i 1 build/${PLATFORM}/tos_image.xml
Flushing the serial port..
Checking if node is a Deluge T2 base station ...
~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠vo~
~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠vo~
~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠vo~
~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠vo~
~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠vo~
~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠ vo~~D☺ ?? ♠ S♠vo~
~D☺ ?? ♠ S♠ vo~ERROR: Timeout. Is the node a Deluge T2 base
station?
i am using latest cygwin, cvs code, have python 2.4.4 and also pyserial,
have done the "Tools Installation" part of "Deluge T2 - Programming maual".
I'm not a regular windows/cygwin user and I need some help to recreate
your setup in order to reproduce the problem. Can you please tell which
version of nesc are you using?
I compiled by hand the nesc-1.3.0 (the version David Gay just announced)
and then I installed the avr rpms indicated here:
http://docs.tinyos.net/index.php/Installing_TinyOS_2.0.2#Manual_installation_on_your_host_OS_with_RPMs
When I compiled the Blink I get a funky error about missing inttytes.h (I
have it in /usr/include/) and then a long list of errors related to
__nesc_ntoh_*. :-( Do you know how to solve this?
--
Razvan ME
has anybody faced a similar problem ? i couldnt find any clue from the
mailing list ..
Thanks
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
