>The libusb IS INSTALLED (i am using ubuntu >8.04)! Most probably the name of the package what you need to compile avrdude with USB support is called libusb-dev. Do you have that one installed?
>I recognized that there are two different >avrdude packages, the one delivered with tinyos (*avrdude-tinyos*) and >the "original" one (*avrdude*), am i right? Yes, you're right. The former one contains a patch to support the MIB510 and MIB520 programming boards to program mica* and iris motes. Unfortunately, it is built without usb support. I will contact Kevin to rebuild it. Thanks, Janos Best regards Jürgen > Juergen, > > The iris target is a good place to start with. If you're lucky enough the > rf230 is hooked up to the MCU the same way on your demo kit as on the iris, > and everything will work out of the box. > > Regarding programming using the avarisp mkII: In order to compile avrdude > with usb support, you'll need libusb. Once you have libusb installed, > avrdude's configure script will find it and will allow you to build avrdude > with usb support. > > Janos > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jürgen Broder > Sent: Thursday, September 04, 2008 6:55 AM > To: [email protected] > Subject: [Tinyos-help] rz200 > > Hello! > > I'm desperately trying to program the Blink-Application on my motes but > without success. I am using the ATAVRRZ200 demonstration kit from ATMEL > (ATMega1281 / rf230 -motes) with an AVRISPmkII USB-Programmer. > > My first question: is the iris-platform the correct choice for > programming my motes? > > Im quite sure that i have set up my tinyos environment correctly, > tos-check-env gives no errors and "make iris" is working too. But when > it gets down to load the file onto the mote i'm having serious problems. > It looks like the option "make iris install *avrisp*,..." is just for > the *serial* AVRISP, am i right? So when i tried to edit the Avrisp make > rules using usb port i get the error message "avrdude: compiling without > usb support". So can anybody give me an advice, how to program the rz200 > using the AVRISPmkII? Thank you very much. > > Greets, Jürgen. > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.169 / Virus Database: 270.6.19/1662 - Release Date: 9/9/2008 > 10:47 AM > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.138 / Virus Database: 270.6.19/1664 - Release Date: 10.09.2008 > 06:00 > > > > No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database: 270.6.20/1666 - Release Date: 9/11/2008 6:55 PM _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
