Hi, I 'm trying to get 6lowpan to work following the steps from the README file in the tinyos-2.x-contrib/berkeley/b6lowpan. Everything builds fine, but when I try to run the serial tunnel driver (Step 3, point 2 of the README) by executing "sudo ./serial_tun /dev/ttyUSB0 telosb", I get the following error:
20:18:37.96446: INFO: created tunnel device: tun0 ifconfig tun0 up ifconfig tun0 mtu 1280 ifconfig tun0 inet6 add 2001:5c0:a07c:000:000:000:000:064/64 ifconfig tun0 inet6 add fe80::064/64 20:18:37.115574: INFO: send me SIGUSR1 to dump the topology to a 'nwgraph.dot' in the cwd 20:18:37.115596: INFO: send me SIGUSR2 to recompute and print source routes to every router Note: sync 20:18:37.175906: INFO: config error: 0x0 addr: 0x64 Which is generated by void handle_other_pkt(uint8_t *data, int len) in serial_tun.c The mote is running IPBaseStation (in $LOWPAN_ROOT/apps). Any help or advice is much appreciated. Thanks --a _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
