Angela Perez wrote: > Hi, > > I 'm trying to get 6lowpan to work following the steps from the README > file in the tinyos-2.x-contrib/berkeley/b6lowpan. Everything builds > fine, but when I try to run the serial tunnel driver (Step 3, point 2 > of the README) by executing "sudo ./serial_tun /dev/ttyUSB0 telosb", I > get the following error: > > 20:18:37.96446: INFO: created tunnel device: tun0 > ifconfig tun0 up > ifconfig tun0 mtu 1280 > ifconfig tun0 inet6 add 2001:5c0:a07c:000:000:000:000:064/64 > ifconfig tun0 inet6 add fe80::064/64 > 20:18:37.115574: INFO: send me SIGUSR1 to dump the topology to a > 'nwgraph.dot' in the cwd > 20:18:37.115596: INFO: send me SIGUSR2 to recompute and print source > routes to every router > Note: sync > 20:18:37.175906: INFO: config error: 0x0 addr: 0x64 > > Which is generated by void handle_other_pkt(uint8_t *data, int len) in > serial_tun.c > > The mote is running IPBaseStation (in $LOWPAN_ROOT/apps). > > Any help or advice is much appreciated. > > Thanks > --a > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > Angela,
From what I can recall from memory is that I see that "INFO" line in my output from serial_tun too but I kind of ignored it because it looked like serial_tun was working in spite of that output (unless that is what is causing my issue? see my "b6LoWPAN - telosb - IPBaseStation - serial_tun - problems" post). Leon _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
