Hi,
Thanks for the link.
After some tests I could determine the following:
- The maximum message size I could have was 106Bytes (my message
structure has 5 nx_uint16_t fields and one array of 48 nx_uint16_t).
- The message is only sent if DTOSH_DATA_LENGTH is set to a value
between 114 and 242.
- If 243 <= DTOSH_DATA_LENGTH <= 347 send signals success, but
senddone never occurs
- if 347 < DTOSH_DATA_LENGTH both send and senddone fail.
Can someone please explain me these results I'm experiencing?
regards,
Joao
On 2008/10/29, at 12:55, Ittipong Khemapech wrote:
I think the following link may be useful to you.
http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2007-August/027614.html
Ittipong
2008/10/29 João Paulo Amaro da Costa Luz Carneiro <[EMAIL PROTECTED]
>
I believe 28 bytes is the default size (TEP111) which can be
increased by defining DTOSH_DATA_LENGTH at compile time . What I
would like to know is what is the maximum value you can assign to
DTOSH_DATA_LENGTH is set to .
I've tested with 300 and send will still return with SUCCESS while
500 won't.
Joao
On 2008/10/29, at 11:37, Ittipong Khemapech wrote:
Not sure about TinyOS 2.1. I'm using TinyOS 2.0.2 and the maximum
payload is 29 bytes.
Ittipong
2008/10/29 João Paulo Amaro da Costa Luz Carneiro <[EMAIL PROTECTED]
>
Can you tell me what is the maximum value for tinyos 2.1?
Joao
On 2008/10/29, at 11:30, Ittipong Khemapech wrote:
I think it's about TinyOS instead of the platform. Please correct
me if I misunderstand.
Ittipong
2008/10/29 João Paulo Amaro da Costa Luz Carneiro <[EMAIL PROTECTED]
>
Hi,
Is there a maximum DTOSH_DATA_LENGTH value for the iris mote?
Best regards,
Joao
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
