thanks for your detailed help.
i use the command line"ping6 -I tun0 -s 0 2001:0638:0709:1234::fffe:14" but the
result is the same as the former letter. I really do not know how to solve this
problem.
best wishes
jackg
2008.11.11
在2008-11-11，"swaytha sasi" <[EMAIL PROTECTED]> 写道：
Hello...
While pinging do u specify the interface?!!! in some cases u have to specify
the interface...after u get the tunneler running
i.e..
ping6 -I tun0 <add>
On Tue, Nov 11, 2008 at 9:19 AM, guoyuehua.cool <[EMAIL PROTECTED]> wrote:
hi guys:
my aim is to connect pc and motes by ipv6.now i have installed the
apps(/apps/basestation) in one mote and 6lowpancli apps in another mote.
In pc side ,i run the "./serial_tun /dev/ttyUSB0 115200" . when I ping the
another mote which is installed the 6lowpancli apps,the result is as following:
sending to serial port...
len: 83
00 ff ff 00 12 4b 00 41 42 0c 40 20 01 06 38 07 09 12 34 00 00 00 00 ff fe 00
12 20 01 06 38 07 09 12 34 00 00 00 00 ff fe 00 14 80 00 48 69 d5 16 00 21 8a
3c 19 49 50 75 0a 00 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a
1b 1c 1d 1e 1f
write_serial_packet returned 1
read: Resource temporarily unavailable
I put one mote ( install base apps and use mib520 connecting to the pc) very
close to another node ,so i guess i should not consider the icmp echo distance
from two nodes. but the result is same.
Has anybody seen this problem and known how to solve this problem?
best wishes
jackg
2008.11.11
[广告] 金秋最关注楼盘-房不胜房
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
