Hi there,
I get a similar problem but am using micaz.
I use the command "sudo ./serial_tun /dev/ttyUSB1 micaz"
and when trying to ping6 the mote with 6lowpancli on it I can see this
output from serial_tun:
data on tun interface
lowpan_compress
sending to serial port...
len: 107
00 ff ff 00 12 63 00 41 42 0c 40 20 01 06 38 07 09 12 34 00 00 00 00
ff fe 00 12 20 01 06 38 07 09 12 34 00 00 ff fe 00 14 00 00 80 00 3e
be 0f 2a 00 07 16 be 4b 49 62 7b 03 00 08 09 0a 0b 0c 0d 0e 0f 10 11
12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28
29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37
write_serial_packet returned 0
read: Resource temporarily unavailable
which seems to be fine as I can see the red led blink (serial to radio
bridged) on the base station mote.
Is there a problem with the "write_serial_packet returned 0" line
above? should it be 0 or 1?
and is "read: Resource temporarily unavailable" normal?
If all this looks ok then it could be a problem with the 6lowpancli.
Can anyone clarify this?
Thanks in advance,
B.
Re: [Tinyos-help] the problem of testing 6lowpan/ipv6
guoyuehua.cool
Tue, 11 Nov 2008 01:56:03 -0800
thanks for your detailed help.
i use the command line"ping6 -I tun0 -s 0 2001:0638:0709:1234::fffe:14" but the
result is the same as the former letter. I really do not know how to solve this
problem.
best wishes
jackg
2008.11.11
在2008-11-11，"swaytha sasi" <[EMAIL PROTECTED]> 写道：
Hello...
While pinging do u specify the interface?!!! in some cases u have to specify
the interface...after u get the tunneler running
i.e..
ping6 -I tun0 <add>
On Tue, Nov 11, 2008 at 9:19 AM, guoyuehua.cool <[EMAIL PROTECTED]> wrote:
hi guys:
my aim is to connect pc and motes by ipv6.now i have installed the
apps(/apps/basestation) in one mote and 6lowpancli apps in another mote.
In pc side ,i run the "./serial_tun /dev/ttyUSB0 115200" . when I ping the
another mote which is installed the 6lowpancli apps,the result is as following:
sending to serial port...
len: 83
00 ff ff 00 12 4b 00 41 42 0c 40 20 01 06 38 07 09 12 34 00 00 00 00 ff fe 00
12 20 01 06 38 07 09 12 34 00 00 00 00 ff fe 00 14 80 00 48 69 d5 16 00 21 8a
3c 19 49 50 75 0a 00 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a
1b 1c 1d 1e 1f
write_serial_packet returned 1
read: Resource temporarily unavailable
I put one mote ( install base apps and use mib520 connecting to the pc) very
close to another node ,so i guess i should not consider the icmp echo distance
from two nodes. but the result is same.
Has anybody seen this problem and known how to solve this problem?
best wishes
jackg
2008.11.11
[广告] 金秋最关注楼盘-房不胜房
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
