Louis Carlos: As far as I know, the IRIS schematics is not public. The 51-pin connector pinout is at http://www.xbow.com/support/support_pdf_files/mpr-mib_series_users_manual.pdf and the mica2 schematics (which is similar to the iris) is at http://www.tinyos.net/scoop/special/hardware .
Janos On Thu, Feb 19, 2009 at 11:50 AM, Luis Carlos Duque Arcila <[email protected]> wrote: > > we have found the atm1281GeneralIOC, and the sth11LogicP. we now can see what > is the next step , wiring those two to have like a "driver" for the sensor, > but to do that we have to know the pins conection beetwen the HIROSE SOCKET > in the IRIS mote and the Atm1281 to can do that, but we were looking for that > conection and didn`t found it. > i just want to know if there is an schematic available, and where, and if > this schematic show that pin conection. in his deffect, know what are the > pins in the atm1281 who are conected to the DATA(INT3) and the CLOCK(PW3) in > the HIROSE SOCKET. > tnx > > L:C: > > > > ________________________________ > Date: Wed, 18 Feb 2009 13:44:35 -0600 > Subject: Re: [Tinyos-help] Help with tinyOs 2.0 in MTS400 SensorBoard > From: [email protected] > To: [email protected] > CC: [email protected] > > > that glue code is available? where? > No, you need to write it. Please read > http://www.tinyos.net/tinyos-2.x/doc/html/tep117.html > > > and wath do you said that is the best option, migrate to TinyOs 1.0 or use > > the other option? > The glue code should not be more than 20 lines of code... Otherwise, > everything should work out of the box with MoteWorks. It's your call. > > Janos > > On Wed, Feb 18, 2009 at 11:46 AM, Luis Carlos Duque Arcila > <[email protected]> wrote: > > Tnx.. that glue code is available? where?,. and wath do you said that is the > best option, migrate to TinyOs 1.0 or use the other option? Tnx again > > > > > L:C: > > > > ________________________________ > Date: Wed, 18 Feb 2009 11:38:09 -0600 > Subject: Re: [Tinyos-help] Help with tinyOs 2.0 in MTS400 SensorBoard > From: [email protected] > To: [email protected] > CC: [email protected] > > I'm afraid there are no mts400 drivers for tinyos 2. But if you only need to > read the sht11 temperature/humidity sensor, the good news is that there's a > platform-independent implementation under tos/chips. You will need to write > the glue code that wires SensirionSht11LogicP to HplAtm128GeneralIOC. > > Janos > > On Wed, Feb 18, 2009 at 10:58 AM, Luis Carlos Duque Arcila > <[email protected]> wrote: > > Hello everyone..Me and my research group about Wireless sensor network > previously work with another sensorboard(Different that the MTS400), but know > we have the MTS400 and IRIS motes, we have a long time triying to handle the > Humidity-Temperature Sensor on the MTS400, but everytime we have a lot of > errors. All the examples we can find is in Tinyos1.0, and we were triying to > migrate to tinyOs2.0, but it is was imposible to make it work... > If anyone can help us in anyway, tanx, a lot of tnx.., any example about this > subject will be great!!! > Please excuse my poor english.. > We are a group from Colombia, and apreciate your help. > > > > L:C: > > > ________________________________ > Invite your mail contacts to join your friends list with Windows Live Spaces. > It's easy! Try it! > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > ________________________________ > Explore the seven wonders of the world Learn more! > > ________________________________ > Explore the seven wonders of the world Learn more! _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
