Hi, I've been in the process of porting tinyos 1.1.15 to run on fleck3bs. Part of what I want to port is the Deluge code. I've been able to get programs running without Deluge. I've been able to get Deluge running up to the point of formatting flash, inserting DelugeBasic, inserting a new image and watching it copy across the network (I've checked the other nodes and dumped the disseminated image and it seems to match OK.) However, when I issue a reboot command, theres a few led flashes and then the yellow and green leds flash rapidly forever. Resetting the fleck boots back into the original program, so I would guess that the new image hasn't been copied across.
I've been looking for information on what the yellow/green flash signal means to no avail. Does anybody have any advice on what this means or what I should be looking for? Doug PS Port information: fleck3bs look a lot like mica2s but with atmega 1281 processors and Nordic 905 radios. To fit the messages, I have set DELUGE_PKT_PAYLOAD_SIZE = 22 in Deluge.h and commented out the uint8_t reserved field of DelugeAdvMsg in DelugeMsg.h _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
