First check the MIB510 silly-switch: https://www.millennium.berkeley.edu/pipermail/tinyos-help/2006-June/017125.html
Then are you sure you are connected to COM1? Try the ListenRaw java program to look at ports and see if you get anything at all. Presumably you have used this current setup to program your motes so the wiring and all is in order, but double check it. MS Vishal Pal wrote: > Hello All, > > I am trying to run SerialForwarder program to fetch the data packets > from the serial port. > > This is my setup: > > 1. I programmed Base Station (ID = 0) with TOSBase application. > 2. I programmed another mote (ID = 2) with OscilloscopeRF application. > 3. I ran SerialForwarder on my PC. I made it to connect to COM1 at > 57600 baud rate. > > But, I am not able to receive the data packets from the base station. My > SerialForwarder's "Read Packet" counter is not incrementing. It is 0 all > the time. > > The SerialForwarder has been connected successfully to the serial port. > > I am using Mica2 motes and MIB510 board. > > The mote with OscilloscopeRF application is blinking its leds showing > that it is actually transmitting the data. Similarly, a yellow led is > blinking on Base Station, showing that it is receiving data from mote > with ID = 2. > > I don't know where I am doing things wrong. Why am I not getting data > packets in SerialForwarder? > > Am I missing something? Please, someone guide me. > > Thank you so much in advance. > > Vishal > > -- > Vishal Pal > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help -- Platform: WinXP/Cygwin TinyOS version: 1.x, Boomerang Programmer: MIB510 Device(s): Mica2, MicaZ, Tmote Sensor board: homebrew _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
