Hey, thanks Michael for the reply. Let me check ListenRaw java program. I will also have a check of the little switch on MIB510 board. I didn't knew about it's functioning.
I will get back to you. Thank you so much for the suggestions. On Sat, Apr 25, 2009 at 3:46 AM, Michael Schippling <[email protected]>wrote: > First check the MIB510 silly-switch: > https://www.millennium.berkeley.edu/pipermail/tinyos-help/2006-June/017125.html > > Then are you sure you are connected to COM1? > > Try the ListenRaw java program to look at ports and see > if you get anything at all. Presumably you have used > this current setup to program your motes so the wiring > and all is in order, but double check it. > > MS > > Vishal Pal wrote: > >> Hello All, >> >> I am trying to run SerialForwarder program to fetch the data packets from >> the serial port. >> >> This is my setup: >> >> 1. I programmed Base Station (ID = 0) with TOSBase application. >> 2. I programmed another mote (ID = 2) with OscilloscopeRF application. >> 3. I ran SerialForwarder on my PC. I made it to connect to COM1 at >> 57600 baud rate. >> >> But, I am not able to receive the data packets from the base station. My >> SerialForwarder's "Read Packet" counter is not incrementing. It is 0 all the >> time. >> >> The SerialForwarder has been connected successfully to the serial port. >> >> I am using Mica2 motes and MIB510 board. >> >> The mote with OscilloscopeRF application is blinking its leds showing that >> it is actually transmitting the data. Similarly, a yellow led is blinking on >> Base Station, showing that it is receiving data from mote with ID = 2. >> >> I don't know where I am doing things wrong. Why am I not getting data >> packets in SerialForwarder? >> >> Am I missing something? Please, someone guide me. >> >> Thank you so much in advance. >> >> Vishal >> >> -- >> Vishal Pal >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > > -- > Platform: WinXP/Cygwin > TinyOS version: 1.x, Boomerang > Programmer: MIB510 > Device(s): Mica2, MicaZ, Tmote > Sensor board: homebrew > > -- Vishal Pal
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
