Are there any special FTDI drivers that need to be installed in order to access the USB device as if it was a serial device? There is a set for Windows, don't know about Linux and VMware.
MS Urs Hunkeler wrote: > Hi Aldo, > > I have not heard of a mote called MSP430+CC2500. The tmote/telosb has a > msp430 micro-controller and a cc2420 radio chip. If this is not a common > mote, then maybe motelist will not recognize it. > > Most likely the mote will be accessible under /dev/ttyUSB0. To find out, > you could click on the icon of the mote in the VMWare screen to disable > the mote, then wait a few seconds and re-enable the mote again. The > command dmesg (which shows system information from the kernel) should > tell you that a new USB device was found and what device file it was > assigned (as I said, most likely /dev/ttyUSB0). > > You could then manually specify the port where the mote is connected: > > make telosb install bsl,/dev/ttyUSB0 > > Note: I have no idea whether your mote really is compatible to the > telosb platform. > > Cheers, > Urs > > > aldo wrote: >> Hello everybody, >> >> I'm trying to download the Blink application to a mote TI MSP430 + CC2500. >> >> The programming environment I'm using is XUBUNTOS 2.1 and I don't know >> if it's the best. >> >> Concerning to Lesson 1 of TinyOS tutorial, when I type "motelist" I don't >> see anything (I plug the mote before switch on the VMWare and when VMWare >> starts It recognize the mote). What can I do? >> The TI MSP430+CC2500 mote is USB. How can I download the aplication into the >> mote? It's a telosb platform? >> >> Forgive me my english level :). >> >> Thank you very much for advance. >> >> Aldo > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
