Hi Lttipong, My understanding is that the transceiver is only part of the whole circuit.
Huasong On Thu, Jun 18, 2009 at 7:55 PM, Ittipong Khemapech < [email protected]> wrote: > Hi all, > > I have been through the output programming in the CC2420 data sheet. What > are the relationships (if any) between output power (dBm) and current > consumption (mA)? For example, the current consumption required for the > output power of -25 and 0 dBm are 8.5 and 17.4 mA, respectively. > > The -25 and 0 dBm are approximately equivalent to 3 and 1,000 micro-watts. > Do they demonstrate the power strength of the generated signal? I am > wondering why a 100% increase in current consumption (8.5 to 17.4 mA) > provides more than 300 times increase (3 to 1,000 micro-watts) in the signal > strength. > > Thanks, > Ittipong > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > --
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
