Hi! On Wed, 30 Sep 2009, BAI LI wrote:
> Hi, > > Last time I talked to Razvan, and I forgot to mention this similar problem > as well. > > I used MicaZ and MIB520 to test the Deluge. When you connect the MIB520 to > PC, it will show two COM#. For example, COM3 and COM4. You only can use > ttyS3 not ttyS(3-1) to inject this image. But the rest of deluge command you > still have to use ttyS(3-1) instead. I haven't investigated this problem > further. MIB510 and MIB520 use slightly different FTDI chips. The one for MIB510 only provides one serial port so that only port is used for both reprogramming the mote and talking to the user application on it. The MIB520 provides two: first one is for reprogramming and the second one is for talking to the mote. :-) > Razvan, could you update the manual if so? you can test it instead. I added a note about this in the 'Quick Start' section. All the best! Razvan ME _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
