Thanks for the clarification, Razvan. 2009/10/1 Razvan Musaloiu-E. <[email protected]>
> Hi! > > On Wed, 30 Sep 2009, BAI LI wrote: > > Hi, >> >> Last time I talked to Razvan, and I forgot to mention this similar problem >> as well. >> >> I used MicaZ and MIB520 to test the Deluge. When you connect the MIB520 to >> PC, it will show two COM#. For example, COM3 and COM4. You only can use >> ttyS3 not ttyS(3-1) to inject this image. But the rest of deluge command >> you >> still have to use ttyS(3-1) instead. I haven't investigated this problem >> further. >> > > MIB510 and MIB520 use slightly different FTDI chips. The one for MIB510 > only provides one serial port so that only port is used for both > reprogramming the mote and talking to the user application on it. The MIB520 > provides two: first one is for reprogramming and the second one is for > talking to the mote. :-) > > Razvan, could you update the manual if so? you can test it instead. >> > > I added a note about this in the 'Quick Start' section. > > All the best! > Razvan ME >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
