Hi, did anyone have any progress so far on making the TinyOS 2.x environment work for Snow Leopard? So far I have the same problems people mentioned already not being able to configure the nesc-1.3.1 and make it compile. Also I can no longer compile any tinyos app. It used to work fine with Leopard but in Snow Leopard everything broke down. Cheers, Themis
On Thu, Sep 24, 2009 at 8:26 AM, Razvan Musaloiu-E. <[email protected]>wrote: > Hi! > > On Thu, 24 Sep 2009, Andres Vahter wrote: > > > Hi, > > > > Yes, it compiles now. > > But I have one more problem when I tried to make Blink app: > > > > Andrese-MBP:Blink Andres$ make micaz > > /bin/sh: tos-ident-flags: command not found > > mkdir -p build/micaz > > compiling BlinkAppC to a micaz binary > > ncc -o build/micaz/main.exe -Os -fnesc-separator=__ -Wall -Wshadow > > -Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb > > -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000 > > -fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())' > > -fnesc-dump='referenced(interfacedefs, components)' > > -fnesc-dumpfile=build/micaz/wiring-check.xml BlinkAppC.nc -lm > > make: ncc: Command not found > > make: *** [exe0] Error 127 > > > > I installed nesc as: sudo port install nesc > > I wonder why ncc is not found? > > > > ncc and the tos-* programs are part of the tinyos tools. You should be > able to compile them this way: > > $ cd $TOSROOT/tools > $ ./Bootstrap > $ ./configure --prefix=$HOME/local > $ make > $ make install > > The binaries will end up in $HOME/local/bin so you'll have to add that to > your path. > > All the best! > Razvan ME > > > On 24.09.2009, at 5:26, Razvan Musaloiu-E. wrote: > > > >> Hi! > >> > >> On Wed, 23 Sep 2009, Razvan Musaloiu-E. wrote: > >> > >>> Hi! > >>> > >>> I just installed Xcode 3.1.4 (this seems to be the latest available for > >>> 10.5) and now I also have the gcc 5493. I'm not sure if it matters but > the > >>> I'm using the port version 1.710 and the AVR compiled fine. I just > notice > >>> that the latest macports is 1.8. I'll update to see if I can replicate > the > >>> error. > >> > >> After upgrading to macports 1.8.0 I did get your error. I just committed > a > >> fix for it. If would be great if you can give it a try. > >> > >> Also great would be if somebody on Snow Leopard would give it a try. I'm > >> curios if this fix also solves the problems there. :D > >> > >> Thank you! > >> Razvan ME > >> > >>> In case if helps, I upload the binaries for Intel for Leopard here: > >>> http://cs.jhu.edu/~razvanm/ports/i386/leopard/ > >>> > >>> If you place them in: > >>> /opt/local/var/macports/packages/darwin/i386 > >>> and you have "portarchivemode yes" in: > >>> /opt/local/etc/macports/macports.conf > >>> then you should be able to do and install by passing the compiling. :D > >>> > >>> All the best! > >>> Razvan ME > >>> > >>> On Wed, 23 Sep 2009, Andres Vahter wrote: > >>> > >>>> Hi, > >>>> > >>>> I have Xcode 3.1.3 > >>>> > >>>> Andres Vahter > >>>> > >>>> > >>>> On 22.09.2009, at 23:19, Razvan Musaloiu-E. wrote: > >>>> > >>>>> Hi! > >>>>> > >>>>> Could you please tell the version of xcode you have? Mine is 3.1.2. > >>>>> > >>>>> Thank you! > >>>>> Razvan ME > >>>>> > >>>>> On Mon, 21 Sep 2009, Andres Vahter wrote: > >>>>> > >>>>>> I have the same versions (only gcc is 3 builds fresher): > >>>>>> > >>>>>> $ uname -a > >>>>>> Darwin Andrese-MBP.local 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul > 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 > >>>>>> > >>>>>> $ gcc --version > >>>>>> i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (Apple Inc. build 5493) > >>>>>> > >>>>>> > >>>>>> I followed these steps (skipped step 3 - i don't need msp430 support > and i > >>>>>> don't have installed nesc yet): > >>>>>> cd /Users/user > >>>>>> git clone git://hinrg.cs.jhu.edu/git/ports.git > >>>>>> Edit /opt/local/etc/macports/sources.conf to include a line: > >>>>>> file:///Users/user/ports > >>>>>> sudo port install msp430-binutils-tinyos msp430-gcc-tinyos > >>>>>> msp430-libc-tinyos (for MSP430) > >>>>>> sudo port install avr-binutils-tinyos avr-gcc-tinyos avr-libc-tinyos > >>>>>> (for AVR) > >>>>>> > >>>>>> Andres Vahter > >>>>>> > >>>>>> > >>>>>> On 21.09.2009, at 2:01, Razvan Musaloiu-E. wrote: > >>>>>> > >>>>>>> Hi! > >>>>>>> On Sun, 20 Sep 2009, Andres Vahter wrote: > >>>>>>>> I tried to install it to 10.5 Leopard and failed with avr-gcc - > here > >>>>>>>> is > >>>>>>>> the output: > >>>>>>> It compiles without errors on my Leopard (10.5.8) with GCC is > 4.0.1. > >>>>>>> Here > >>>>>>> are my settings: > >>>>>>> > >>>>>>> $ uname -a > >>>>>>> Darwin alexandra.local 9.8.0 Darwin Kernel Version 9.8.0: > Wed Jul 15 > >>>>>>> 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 > >>>>>>> > >>>>>>> $ gcc --version > >>>>>>> i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (Apple Inc. build > 5490) > >>>>>>> Are you using something else? > >>>>>>> -- > >>>>>>> Razvan ME > >>>>>>>> Andrese-MBP:~ Andres$ sudo port install avr-binutils-tinyos > >>>>>>>> avr-gcc-tinyos avr-libc-tinyos > >>>>>>>> Warning: No quick index file found, attempting to generate one for > >>>>>>>> source: file:///Users/Andres/ports > >>>>>>>> ---> Computing dependencies for avr-binutils-tinyos > >>>>>>>> ---> Fetching avr-binutils-tinyos > >>>>>>>> ---> Attempting to fetch avr-binutils.patch from > http://arn.se.distfiles.macports.org/avr-binutils-tinyos > >>>>>>>> ---> Attempting to fetch avr-binutils.patch from > http://distfiles.macports.org/avr-binutils-tinyos > >>>>>>>> ---> Attempting to fetch avr-binutils.patch from > http://tinyos.stanford.edu/tinyos/toolchain/repo/ > >>>>>>>> ---> Attempting to fetch binutils-2.17.tar.bz2 from > http://arn.se.distfiles.macports.org/avr-binutils-tinyos > >>>>>>>> ---> Attempting to fetch binutils-2.17.tar.bz2 from > http://distfiles.macports.org/avr-binutils-tinyos > >>>>>>>> ---> Attempting to fetch binutils-2.17.tar.bz2 from > http://tinyos.stanford.edu/tinyos/toolchain/repo/ > >>>>>>>> ---> Verifying checksum(s) for avr-binutils-tinyos > >>>>>>>> ---> Extracting avr-binutils-tinyos > >>>>>>>> ---> Applying patches to avr-binutils-tinyos > >>>>>>>> ---> Configuring avr-binutils-tinyos > >>>>>>>> ---> Building avr-binutils-tinyos > >>>>>>>> ---> Staging avr-binutils-tinyos into destroot > >>>>>>>> Note: avr-binutils-tinyos installs files outside the common > directory > >>>>>>>> structure. > >>>>>>>> ---> Installing avr-binutils-tinyos @2.17_0 > >>>>>>>> ---> Activating avr-binutils-tinyos @2.17_0 > >>>>>>>> ---> Cleaning avr-binutils-tinyos > >>>>>>>> ---> Computing dependencies for avr-gcc-tinyos > >>>>>>>> ---> Fetching avr-gcc-tinyos > >>>>>>>> ---> Attempting to fetch avr-gcc.patch from > http://arn.se.distfiles.macports.org/avr-gcc-tinyos > >>>>>>>> ---> Attempting to fetch avr-gcc.patch from > http://distfiles.macports.org/avr-gcc-tinyos > >>>>>>>> ---> Attempting to fetch avr-gcc.patch from > http://tinyos.stanford.edu/tinyos/toolchain/repo/ > >>>>>>>> ---> Attempting to fetch gcc-4.1.2.tar.bz2 from > http://arn.se.distfiles.macports.org/avr-gcc-tinyos > >>>>>>>> ---> Attempting to fetch gcc-4.1.2.tar.bz2 from > http://distfiles.macports.org/avr-gcc-tinyos > >>>>>>>> ---> Attempting to fetch gcc-4.1.2.tar.bz2 from > http://tinyos.stanford.edu/tinyos/toolchain/repo/ > >>>>>>>> ---> Verifying checksum(s) for avr-gcc-tinyos > >>>>>>>> ---> Extracting avr-gcc-tinyos > >>>>>>>> ---> Applying patches to avr-gcc-tinyos > >>>>>>>> ---> Configuring avr-gcc-tinyos > >>>>>>>> ---> Building avr-gcc-tinyos > >>>>>>>> Error: Target org.macports.build returned: shell command " cd > >>>>>>>> > "/opt/local/var/macports/build/_Users_Andres_ports_cross_avr-gcc-tinyos/work/gcc-4.1.2" > >>>>>>>> && /usr/bin/make -j2 all " returned error 2 > >>>>>>>> Command output: else true; fi; \ > >>>>>>>> echo timestamp > include/fixed; \ > >>>>>>>> fi > >>>>>>>> echo timestamp > stmp-fixproto > >>>>>>>> /usr/bin/make \ > >>>>>>>> CFLAGS="-O2 -arch i386 -W -Wall -Wwrite-strings > >>>>>>>> -Wstrict-prototypes -Wmissing-prototypes -pedantic -Wno-long-long > >>>>>>>> -Wno-variadic-macros -Wold-style-definition > >>>>>>>> -Wmissing-format-attribute > >>>>>>>> " \ > >>>>>>>> CONFIG_H="config.h auto-host.h > >>>>>>>> ../.././gcc/../include/ansidecl.h" > >>>>>>>> \ > >>>>>>>> MAKEOVERRIDES= \ > >>>>>>>> -f libgcc.mk all > >>>>>>>> for d in libgcc avr3 libgcc/avr3 avr4 libgcc/avr4 avr5 > libgcc/avr5; > >>>>>>>> do \ > >>>>>>>> if [ -d $d ]; then true; else /bin/sh > >>>>>>>> ../.././gcc/../mkinstalldirs > >>>>>>>> $d; fi; \ > >>>>>>>> done > >>>>>>>> mkdir libgcc > >>>>>>>> mkdir avr3 > >>>>>>>> mkdir libgcc/avr3 > >>>>>>>> mkdir avr4 > >>>>>>>> mkdir libgcc/avr4 > >>>>>>>> mkdir avr5 > >>>>>>>> mkdir libgcc/avr5 > >>>>>>>> if [ -f stmp-dirs ]; then true; else touch stmp-dirs; fi > >>>>>>>> > /opt/local/var/macports/build/_Users_Andres_ports_cross_avr-gcc-tinyos/work/gcc-4.1.2/host-i386-apple-darwin9.8.0/gcc/xgcc > >>>>>>>> > -B/opt/local/var/macports/build/_Users_Andres_ports_cross_avr-gcc-tinyos/work/gcc-4.1.2/host-i386-apple-darwin9.8.0/gcc/ > >>>>>>>> -B/opt/local/avr/bin/ -B/opt/local/avr/lib/ -isystem > >>>>>>>> /opt/local/avr/include -isystem /opt/local/avr/sys-include -O2 > -O2 > >>>>>>>> -O2 > >>>>>>>> -arch i386 -DIN_GCC -DCROSS_COMPILE -W -Wall -Wwrite-strings > >>>>>>>> -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition > >>>>>>>> -isystem ./include -DDF=SF -Dinhibit_libc -mcall-prologues -g > >>>>>>>> -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc -I. -I. > >>>>>>>> -I../.././gcc -I../.././gcc/. -I../.././gcc/../include > >>>>>>>> -I../.././gcc/../libcpp/include -DL_mulqi3 -xassembler-with-cpp -c > >>>>>>>> ../.././gcc/config/avr/libgcc.S -o libgcc/./_mulqi3.o > >>>>>>>> > /opt/local/var/macports/build/_Users_Andres_ports_cross_avr-gcc-tinyos/work/gcc-4.1.2/host-i386-apple-darwin9.8.0/gcc/xgcc > >>>>>>>> > -B/opt/local/var/macports/build/_Users_Andres_ports_cross_avr-gcc-tinyos/work/gcc-4.1.2/host-i386-apple-darwin9.8.0/gcc/ > >>>>>>>> -B/opt/local/avr/bin/ -B/opt/local/avr/lib/ -isystem > >>>>>>>> /opt/local/avr/include -isystem /opt/local/avr/sys-include -O2 > -O2 > >>>>>>>> -O2 > >>>>>>>> -arch i386 -DIN_GCC -DCROSS_COMPILE -W -Wall -Wwrite-strings > >>>>>>>> -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition > >>>>>>>> -isystem ./include -DDF=SF -Dinhibit_libc -mcall-prologues -g > >>>>>>>> -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc -I. -I. > >>>>>>>> -I../.././gcc -I../.././gcc/. -I../.././gcc/../include > >>>>>>>> -I../.././gcc/../libcpp/include -DL_mulhi3 -xassembler-with-cpp -c > >>>>>>>> ../.././gcc/config/avr/libgcc.S -o libgcc/./_mulhi3.o > >>>>>>>> xgcc: i386: No such file or directory > >>>>>>>> xgcc: i386: No such file or directory > >>>>>>>> make[3]: *** [libgcc/./_mulqi3.o] Error 1 > >>>>>>>> make[3]: *** Waiting for unfinished jobs.... > >>>>>>>> make[3]: *** [libgcc/./_mulhi3.o] Error 1 > >>>>>>>> make[2]: *** [stmp-multilib] Error 2 > >>>>>>>> make[1]: *** [all-gcc] Error 2 > >>>>>>>> make: *** [all] Error 2 > >>>>>>>> Error: Status 1 encountered during processing. > >>>>>>>> So AVR doesn't work on 10.5 Leopard either? > >>>>>>>> Andres Vahter > >>>>>>>> On 19.09.2009, at 1:44, Razvan Musaloiu-E. wrote: > >>>>>>>>> Hi! > >>>>>>>>> I update the unofficial macports [1] for nesc and the MSP430 > >>>>>>>>> toolchain to > >>>>>>>>> compile properly on Snow Leopard. For now I have limited access > to > >>>>>>>>> Snow > >>>>>>>>> Leopard so I haven't fix the completely the AVR yet. > >>>>>>>>> [1] http://hinrg.cs.jhu.edu/git/?p=ports.git; > >>>>>>>>> -- > >>>>>>>>> Razvan ME > >>>>>>>>> _______________________________________________ > >>>>>>>>> Tinyos-help mailing list > >>>>>>>>> [email protected] > >>>>>>>>> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > >>>> > >>> _______________________________________________ > >>> Tinyos-help mailing list > >>> [email protected] > >>> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > >>> > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
