Hello Daniel, In order to view data from XMDA300 (xmesh) application, you will need to use XMeshBase as a base station application. With XSensorMDA300, which TOSBase app are you using?
Giri -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Tuesday, October 27, 2009 2:50 AM To: [email protected] Subject: [Tinyos-help] no data receiving at XSensorMDA300 example Hallo, I tried to use the MDA300 sensor board with a iris mote. I flashed it with the XSensorMDA300 example from Crossbow. At the gateway is installed the TOSBASE application from Crossbow. I added a gyro to ADC of the MDA300 with a corresponding voltage divider. But my problem is that no data is received at the TOSBASE. I used the LEDs to verify that the messages are send at the mote. This seems to be OK. But I do not receive any messages. When I using the XMDA300 (xmesh) application messages are received at TOSBASE (displayed with xserve). Unfortunately only the soil temperature, etc. Has somebody any idea why I do not receive messages from the XSensor application? Do I have to do changes at the TOSBASE application for the XSensor application? Many Thanks Daniel _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
