Somewhere at the bottom of the pile of code and configs should be an ADC connection. There used to be a "make micaz docs" command that generated a module connection diagram from a working program, and after hours of study you could actually figure out what it was trying to tell you about the component relationships.
Or you can cheat and look at the schematic... MS Akankshu Dhawan wrote: > Hi All > How can I find similarly which ADC is the Microphone (MicP and MicStream > components) connecting to ??? I am using MICAZ motes and mts310 sensorboard > > I want to know where should I look to find the exact ADC I am getting > the data from ? > > Thanks > Akankshu > > On Fri, Nov 13, 2009 at 3:55 PM, Michael Schippling <[email protected] > <mailto:[email protected]>> wrote: > > The DemoSensor component is supplied for each kind of sensor board > in order to confuse you about how things work...actually to make it > possible to reuse upper level code without change depending on the > sensor board definition. It fundamentally exposes an ADC interface > connected to whatever the original coders thought was a convenient > sensor. So to see what your specific system is doing you need to > look at the DemoSensor.nc file associated with the platform or > attached sensor board, e.g., the sensorboards/mda100 version. > > You can just replace DemoSensor with a config for ADC0 in your > program if you are attaching directly and don't need to do any > other control, like powering up the Photo sensor. Look at how > DemoSensor or Photo configs an ADC for an example. > > MS > > Li, Haixia wrote: > > Hello, > > > > I am using Tinyos 2.x on IRIS. I read the DemoSensorC component at > > \tos\sensorboards\basicsb\. I found there is another DemoSensorC > > component at \tos\sensorboards\mda100. I traced the first one. I > found > > the ADC 6 and PortC1 are used for the sensor. Now I want to connect a > > sensor to ADC 0. So Can I just imitate PhotoP, PhotoDeviceP, and > PhotoC > > to write components for my sensor? > > > > In addition, I want to connect my sensor by mda 320 or mda 100cb > to a > > node. So, does it mean I have to imitate the DemoSensorC at > > \tos\sensorboards\mda100? Is there anyone can guide me? > > > > Any help will be appreciated. > > > > > > Haixia Li _______________________________________________ Tinyos-help > > mailing list [email protected] > <mailto:[email protected]> > > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > _______________________________________________ > Tinyos-help mailing list > [email protected] > <mailto:[email protected]> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > -- > First they ignore you, then they laugh at you, then they fight you, then > you win. > - Mahatma Gandhi _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
