Hi Fabien, Plz read, "Experimental Study: Link Quality and Deployment Issues in Wireless Sensor Networks" Monique Becker et al. http://www.springerlink.com/content/t24g5763r7j765tw/ They use MultiHopLQI. Thanks, Riki
-----Original Message----- From: Fabien CHRAIM <[email protected]> To: Jordi Soucheiron <[email protected]> Date: Tue, 23 Feb 2010 00:51:58 -0800 Subject: Re: [Tinyos-help] tpl for moteiv's tmote sky nodes > Unless you are concerned about interfering with some other network, I would > not suggest lowering your transmission power. > If you want to save energy, this is not the way to do it. Transmission power > is not the energy bottleneck. > > Fabien. > > On Tue, Feb 23, 2010 at 12:41 AM, Jordi Soucheiron < > [email protected]> wrote: > > > You can add this to the makefile: CFLAGS += -DCC2420_DEF_RFPOWER=4 > > I think the values go from 1 to 31 beeing 1 the lowest and 31 the higher > > TPL. > > Good luck! > > > > 2010/2/23 Riki Tiki <[email protected]> > > > > hi, I am using Moteiv's Tmote Sky nodes... How can I change the > >> Transmission Power Level(TPL) of my nodes? And how can I know the minimum > >> and maximum values for TPL? thanks a lot! > >> _______________________________________________ > >> Tinyos-help mailing list > >> [email protected] > >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > >> > > > > > > > > -- > > Jordi Soucheiron > > Software Engineer > > > > DEXMA > > Parc TecnolРgic la Salle > > Sant Joan de la Salle, 42 > > 08022 Barcelona > > t/f: [+34] 93 181 01 95 > > www.dexmatech.com > > [email protected] > > > > > > > > > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
