I've always used the same power for all the nodes in the network. If you need to change it for every node I recommend using "make tmote install" instead of the 2 steps you're using (it's faster). Good luck and let me know if you find a nice way to solve this
2010/2/23 Riki Tiki <[email protected]> > Hi Jordi, > > Sorry, forgot to ask. How can I do this per node? > After changing the makefile config should I always start again from "make > tmote" and then do the following "make tmote reinstall". > > Thanks a lot in advance, > Riki > > > -----Original Message----- > From: Jordi Soucheiron <[email protected]> > To: Riki Tiki <[email protected]> > Date: Tue, 23 Feb 2010 09:41:46 +0100 > Subject: Re: [Tinyos-help] tpl for moteiv's tmote sky nodes > > > You can add this to the makefile: CFLAGS += -DCC2420_DEF_RFPOWER=4 > > I think the values go from 1 to 31 beeing 1 the lowest and 31 the higher > > TPL. > > Good luck! > > > > 2010/2/23 Riki Tiki <[email protected]> > > > > > hi, I am using Moteiv's Tmote Sky nodes... How can I change the > > > Transmission Power Level(TPL) of my nodes? And how can I know the > minimum > > > and maximum values for TPL? thanks a lot! > > > _______________________________________________ > > > Tinyos-help mailing list > > > [email protected] > > > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > > > > > > > -- > > Jordi Soucheiron > > Software Engineer > > > > DEXMA > > Parc Tecnològic la Salle > > Sant Joan de la Salle, 42 > > 08022 Barcelona > > t/f: [+34] 93 181 01 95 > > www.dexmatech.com > > [email protected] > > > > > -- Jordi Soucheiron Software Engineer DEXMA Parc Tecnològic la Salle Sant Joan de la Salle, 42 08022 Barcelona t/f: [+34] 93 181 01 95 www.dexmatech.com [email protected]
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
