Th command is "make tmote blip install bsl,/dev/ttyUSB1" Kevin
On Sat, Feb 27, 2010 at 3:42 AM, <[email protected]> wrote: > Thanks for your reply. > > For example, when I tried to run "make tmote blip install > /dev/ttyUSB1" it ignores the device I specified and it is always > /dev/ttyUSB0 that ends up programmed. > > Quoting Eric Decker <[email protected]>: > >> what do you mean "tinyos chooses?" Can you be a bit more specific about >> what you are trying to do? >> >> On Fri, Feb 26, 2010 at 12:41 PM, <[email protected]> wrote: >> >>> Dear all, >>> >>> I have two motes attached at /dev/ttyUSB0 and /dev/ttyUSB1 and tinyos >>> always choose the one at /dev/ttyUSB0 regardless which on I specify in >>> the commands. >>> >>> Any ideas what might be the cause? Many thanks. >>> >>> Best regards, >>> >>> Peng >>> >>> ---------------------------------------------------------------- >>> This message was sent using IMP, the Internet Messaging Program. >>> >>> >>> _______________________________________________ >>> Tinyos-help mailing list >>> [email protected] >>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >>> >> >> >> >> -- >> Eric B. Decker >> Senior (over 50 :-) Researcher >> > > > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet Messaging Program. > > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- ~Kevin _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
