Hi Arik, Thanks very much for your explanation.
Peng Quoting Arik Sapojnik <[email protected]>: > Peng, > > bsl states the port you want to send your bin file to (in oher words which > mote you want to program). > Read here: http://docs.tinyos.net/index.php/Getting_Started_with_TinyOS > > Use "make tmote blip install*,<ID>* bsl,/dev/ttyUSB1" to state the ID. > For instance "make tmote blip install*,5* bsl,/dev/ttyUSB1" to specify the > ID. > > Arik > > On Sat, Feb 27, 2010 at 23:09, <[email protected]> wrote: > >> Thanks Kevin, >> >> This indeed solve the problem of selecting specific devices. However >> there are some other problems: >> >> 1. >> My previous command was based on the blip tutorial: >> >> http://docs.tinyos.net/index.php/BLIP_Tutorial#Step_1:_Install_an_Edge_Router >> >> Why didn't it work? And what does bsl mean and exactly do here? >> >> 2. >> How can I specify the device ID? Because after I programmed both motes >> at USB1 and USB2, I end up having 2 motes with the same ID (and hence >> same IPv6 address in my case). >> >> Many thanks. >> >> Regards, >> >> Peng >> >> >> Quoting Kevin Klues <[email protected]>: >> >> > Th command is "make tmote blip install bsl,/dev/ttyUSB1" >> > >> > Kevin >> > >> > On Sat, Feb 27, 2010 at 3:42 AM, <[email protected]> wrote: >> >> Thanks for your reply. >> >> >> >> For example, when I tried to run "make tmote blip install >> >> /dev/ttyUSB1" it ignores the device I specified and it is always >> >> /dev/ttyUSB0 that ends up programmed. >> >> >> >> Quoting Eric Decker <[email protected]>: >> >> >> >>> what do you mean "tinyos chooses?" Can you be a bit more specific >> about >> >>> what you are trying to do? >> >>> >> >>> On Fri, Feb 26, 2010 at 12:41 PM, <[email protected]> wrote: >> >>> >> >>>> Dear all, >> >>>> >> >>>> I have two motes attached at /dev/ttyUSB0 and /dev/ttyUSB1 and tinyos >> >>>> always choose the one at /dev/ttyUSB0 regardless which on I specify in >> >>>> the commands. >> >>>> >> >>>> Any ideas what might be the cause? Many thanks. >> >>>> >> >>>> Best regards, >> >>>> >> >>>> Peng >> >>>> >> >>>> ---------------------------------------------------------------- >> >>>> This message was sent using IMP, the Internet Messaging Program. >> >>>> >> >>>> >> >>>> _______________________________________________ >> >>>> Tinyos-help mailing list >> >>>> [email protected] >> >>>> >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> >>>> >> >>> >> >>> >> >>> >> >>> -- >> >>> Eric B. Decker >> >>> Senior (over 50 :-) Researcher >> >>> >> >> >> >> >> >> >> >> ---------------------------------------------------------------- >> >> This message was sent using IMP, the Internet Messaging Program. >> >> >> >> >> >> >> >> _______________________________________________ >> >> Tinyos-help mailing list >> >> [email protected] >> >> >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> >> >> > >> > >> > >> > -- >> > ~Kevin >> > >> > >> >> >> >> ---------------------------------------------------------------- >> This message was sent using IMP, the Internet Messaging Program. >> >> >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > > > > -- > Best Regards, > Arik Sapojnik > ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
