Hello, I've experienced this problem many times. Usually I try to disconnect the mote and connect it again and after a few "make tmote reinstall" I can program it. Good luck *Jordi Soucheiron* Software Engineer
*DEXMA* Parc Tecnològic la Salle Sant Joan de la Salle, 42 08022 Barcelona t/f: [+34] 93 181 01 95 www.dexmatech.com [email protected] 2010/4/26 Steven Hodgson <[email protected]> > I have been able to compile and install programs on my motes for several > days. > However, now my programs compile, but have errors when trying to load on to > the motes such as: - > - [Errno 108] Cannot send after transport endpoint shutdown, or > - [Errno 19] No such device > > i.e. > u...@computer:/opt/tinyos-2.1.0/apps/Blink$ make telosb reinstall > bsl,/dev/ttyUSB0 > cp build/telosb/main.ihex build/telosb/main.ihex.out > installing telosb binary using bsl > tos-bsl --telosb -c /dev/ttyUSB0 -r -e -I -p build/telosb/main.ihex.out > MSP430 Bootstrap Loader Version: 1.39-telos-8 > Mass Erase... > > An error occoured: > [Errno 108] Cannot send after transport endpoint shutdown > make: *** [program] Error 1 > > I am using tinyos-2.1.0 on Ubuntu 9.10. > > If anybody has seen this problem before, and could shed some light, it > would be greatly appreciated. > > Thanks, > Steven > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
