I would also suggest NOT to use a USB hub, if you are using a such. Arik
On Mon, Apr 26, 2010 at 14:40, Jordi Soucheiron <[email protected]>wrote: > Hello, > I've experienced this problem many times. Usually I try to disconnect the > mote and connect it again and after a few "make tmote reinstall" I can > program it. > Good luck > *Jordi Soucheiron* > Software Engineer > > *DEXMA* > Parc Tecnològic la Salle > Sant Joan de la Salle, 42 > 08022 Barcelona > t/f: [+34] 93 181 01 95 > www.dexmatech.com > [email protected] > 2010/4/26 Steven Hodgson <[email protected]> > >> I have been able to compile and install programs on my motes for several >> days. >> However, now my programs compile, but have errors when trying to load on >> to the motes such as: - >> - [Errno 108] Cannot send after transport endpoint shutdown, or >> - [Errno 19] No such device >> >> i.e. >> u...@computer:/opt/tinyos-2.1.0/apps/Blink$ make telosb reinstall >> bsl,/dev/ttyUSB0 >> cp build/telosb/main.ihex build/telosb/main.ihex.out >> installing telosb binary using bsl >> tos-bsl --telosb -c /dev/ttyUSB0 -r -e -I -p build/telosb/main.ihex.out >> MSP430 Bootstrap Loader Version: 1.39-telos-8 >> Mass Erase... >> >> An error occoured: >> [Errno 108] Cannot send after transport endpoint shutdown >> make: *** [program] Error 1 >> >> I am using tinyos-2.1.0 on Ubuntu 9.10. >> >> If anybody has seen this problem before, and could shed some light, it >> would be greatly appreciated. >> >> Thanks, >> Steven >> >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Best Regards, Arik Sapojnik
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
