Thank you for help. OK,
-Analog output to any ADC pin. -Ground wire to any gnd pin? -Excitation wire to what pin? On thing more, in practically i have to put wires into the holes until the iris mote? and somehow to keep it stable..Ground's wire is thin and can pass into the hole , but the other two wires is a little more thick and can not..is that ok? Should somehow make the wire thinner with some tool? I have Tinyos-2.1.1 , here in tutorials http://docs.tinyos.net/index.php/TinyOS_Tutorials will help me the sensing more or adc ? Thanks again.. Michael Schippling-2 wrote: > > You should be able to connect the analog output to any available > ADC pin. ADC3-7 seem to be available on the prototyping pads, > however ADC7 is also used internally to read the Battery reference. > > From my brief reading of the sensor specs, if you have the EC-5 > you can run it from the same battery power as the iris. But with > any of them the max output you get is 40% of the supply voltage, > so your conversion range is somewhat limited. Running an EC-10 > on 5v would boost that range a bit, but then you need another > power supply...and another sensor... > > You can probably modify the DemoSensor module to read from the > ADC you select. That module is used in most of the demo apps, > in TOS-1.x at least... > > MS > > George_1985 wrote: >> Hi guys i have allready MIB520, iris motes , MDA100CB developemnt area >> and >> soil moisture senros EC-5 from Decagon. >> >> I have put the MDA100CB on iris (with 51-pins). >> >> So i want to connect the soil moisture sensor in MDA100CB and send data >> to >> iris and then to the MIB520 board. >> >> Ηοw have to connect the cable's soil to MDA100CB? Here is the manual's >> soil >> http://www.decagon.com/assets/Manuals/EC-20-EC-10-EC-5-Soil-Moisture-Sensor-User-Manual.pdf >> . >> >> It has three wires Analog out , Ground , Excitation. >> >> Thank you > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- View this message in context: http://old.nabble.com/MDA100CB-and-Soil-Moisture-Sensor-tp31598297p31598786.html Sent from the TinyOS - Help mailing list archive at Nabble.com. _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
