Hi! On Jul 25, 2011, at 1:09 PM, Miklos Maroti wrote:
> Hi Guys, > > I see. It is good that you have it verified for CC2420x and cc2520. I > do not know how to proceed. I want to add 16/64 bit support to > rfxlink, but that will be experimental and should not be included in > the 2.1.2 release. I agree with this. We need some time to write/test before the release. > Do you know if BLIP/RPL is going to be part of the > next 2.1.2 release? AFAIK, yes. BLIP/RPL will be a part of 2.1.2. > If so, then a 16-bit version only should be > possible with tested code, no? Well, including this would mean that we would be adding in code that 'will' eventually change. So I disagree. > Another thing, maybe tossim support for > rfxlink could go in in the release. I'll leave this up to Markus but my thoughts are as above. > I do not like that too many things > live outside of tinyos-main, and it would be best if we could bring it > in and get that in for the next release. I agree. But What's worse is to have code that will change anyway in the official release. My 2 cents. Thanks! -John > What do you think? > > Best, > Miklos > > On Mon, Jul 25, 2011 at 6:27 PM, JeongGil Ko (John) <[email protected]> wrote: >> Hi! >> >> On Jul 25, 2011, at 12:21 PM, Markus Becker wrote: >> >>>> Hi Markus, >>>> >>>> Have you verified if it works on real hardware? >>> >>> Unfortunately not, we only have cc2420 hardware available. And for full blip >>> support, the 16/64 bit support is missing. So currently it works in >>> simulation >>> with PFLAGS += -DBLIP_DERIVE_SHORTADDRS in the UDPEcho Makefile. >>> >> >> In my previous email I meant that Markus has tried with CC2420x and I have >> tried with CC2520. No RF230-based platform tested yet. >> >> -John >> >>>> The new release of >>>> tinyos-main is coming up. Is there any chance that the necessary >>>> changes are folded into tinyos-main before the 2.1.2 release? >>> >>> Don't know currently, whether this should be pushed for for 2.1.2 without 16 >>> and 64 bit support. Anyway this would pull in Morten's rfxlink TOSSIM >>> changes, >>> as we used that as the base and updated it for rfxlink changes on >>> trunk/master. >>> >>> Markus >>> >>>> best, >>>> Miklos >>>> >>>> On Mon, Jul 25, 2011 at 5:31 PM, Markus Becker >>>> >>>> <[email protected]> wrote: >>>>> Hi, >>>>> >>>>> we have a modified version which runs on rfxlink stack, if blip-rpl is >>>>> set to use 16bit addressing only. Currently, we are however using it >>>>> only on its TOSSIM radio driver. If you would want to try it out, >>>>> contact me again. >>>>> >>>>> BR, >>>>> Markus >>>>> >>>>>> Hi Nico, >>>>>> >>>>>> I have never used BLIP, but tried to give assistence to people who >>>>>> did. I do not know how far along they are. At some point we got BLIP >>>>>> working for IRIS, merged our changes back to tinyos-main, but by then >>>>>> BLIP has been changed. I think iof you are familiar with BLIP, and it >>>>>> works for you with some CC2420 based mote, then it will be trivial to >>>>>> modify it to work with R230. >>>>>> >>>>>> Best, >>>>>> Miklos >>>>>> >>>>>> On Wed, Jul 20, 2011 at 3:34 PM, Nico Laum <[email protected]> >>> wrote: >>>>>>> Dear Miklos, >>>>>>> >>>>>>> >>>>>>> >>>>>>> I have seen that you have worked on adding support for RF230 in BLIP >>>>>>> for Tiny OS. Can you tell me if this already works right now? The >>>>>>> BLIP wiki says that the IRIS platform (btw, I’m trying to run it on >>>>>>> Mulle 5.2) with RF230 is supported. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Thanks for your help! >>>>>>> >>>>>>> >>>>>>> >>>>>>> Best regards, >>>>>>> >>>>>>> Nico >>>>>>> >>>>>>> >>>>>>> >>>>>>> Nico Laum, M.Sc. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Universität Rostock >>>>>>> >>>>>>> Institut für Angewandte Mikroelektronik und Datentechnik >>>>>>> >>>>>>> Richard-Wagner-Str. 31 >>>>>>> >>>>>>> D - 18119 Rostock-Warnemünde >>>>>>> >>>>>>> Fon: +49 (0)381 498-7273 >>>>>>> >>>>>>> Fax: +49 (0)381 498-118 7273 >>>>>>> >>>>>>> E-Mail: [email protected] >>>>>>> >>>>>>> Internet: www.uni-rostock.de >>>>>> >>>>>> _______________________________________________ >>>>>> Tinyos-help mailing list >>>>>> [email protected] >>>>>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >>>>> >>>>> ------------------------------------------------ >>>>> >>>>> | Dipl.-Ing. Markus Becker >>>>> | Communication Networks >>>>> | TZI - Center for Computing Technologies >>>>> | University Bremen >>>>> | Germany >>>>> >>>>> ------------------------------------------------ >>>>> >>>>> | web: http://www.comnets.uni-bremen.de/~mab/ >>>>> | mailto: [email protected] >>>>> | telephone: +49 421 218 62379 >>>>> | building: NW1 room: N2260 >>>>> >>>>> ------------------------------------------------ >>> ------------------------------------------------ >>> | Dipl.-Ing. Markus Becker >>> | Communication Networks >>> | TZI - Center for Computing Technologies >>> | University Bremen >>> | Germany >>> ------------------------------------------------ >>> | web: http://www.comnets.uni-bremen.de/~mab/ >>> | mailto: [email protected] >>> | telephone: +49 421 218 62379 >>> | building: NW1 room: N2260 >>> ------------------------------------------------ >>> >>> _______________________________________________ >>> Tinyos-help mailing list >>> [email protected] >>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> >> ------ >> JeongGil Ko (John) >> Ph.D. Student >> Department of Computer Science >> Johns Hopkins University >> http://www.cs.jhu.edu/~jgko >> >> > ------ JeongGil Ko (John) Ph.D. Student Department of Computer Science Johns Hopkins University http://www.cs.jhu.edu/~jgko _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
