Hi Marianna, here i'm using crossbow's motes and they works fine. to submit an application type make micaz install,1 mib510,/dev/ttyUSB0.
Rafael de Oliveira Costa M.Sc. Student PPGI / DCC - iNCE/ UFRJ Rio de Janeiro, RJ, Brazil "The first step to getting the things you want out of life is this : decide what you want" Ben Stein On Mon, Sep 5, 2011 at 11:32 AM, Marianna Araujo < [email protected]> wrote: > I started using the crossbow's motes (MTS420 platform - micaz/mica2) and I > have been problem. I tried send an application for the sources and now one > of them isn't been recognized in network. I rebooted the other sources and > they were ok. However, exceptionally this source, did not work. I've tried > to upload the firmware, but I really do not know which firmware suitable for > him. Can you tell me what should I do? > > Another thing, I couldn't submit an application for the motes, for example the > blink application. In the notepad, after to compiling, I made "make micaz > reinstall mib520 (because I use USB port), com3 (the lower port)" and I got > the following error "MIB520 must be *defined, try "make micaz help". > Stop". > * > Best Regards, > > -- > Marianna Araújo > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
